Radiall R125.541.001 Series SMA End Launch Flange Jack Receptacle with Tab Contact

Category: Connectors, Electronics, Radiall

Overview of Radiall R125.541.001 Series SMA

The Radiall R125.541.001 Series SMA consists of an end launch flange jack receptacle with a tab contact. It is designed with precision and built using high-quality materials to maintain a robust connection and performance.

Components and Materials

Key components of the jack receptacle include:

Body: Made of stainless steel with passivation for corrosion resistance.
Center Contact: Constructed from beryllium copper with a gold plating of 1.3 micrometers over a nickel underlay of 2 micrometers.
Outer Contact: Features nickel plating of 2 micrometers.
Insulator: Utilizes PTFE material known for its excellent thermal and electrical insulation properties.
Gasket: Ensures a secure and tight seal for the unit.

Electrical Characteristics

The electrical specifications include an impedance of 50 ohms with a frequency range up to 4 GHz. It boasts a low voltage standing wave ratio (VSWR) of 1.06, indicating minimal signal reflection, and insertion loss values that remain well-controlled with frequency. The unit can withstand up to 500 Veff maximum voltage rating and ensures a reliable dielectric withstanding voltage of at least 1000 Veff. Insulation resistance is maintained at a minimum of 5000 MΩ to ensure signal integrity.

Environmental and Mechanical Characteristics

The SMA receptacle operates reliably within an extensive temperature range from -65°C to +165°C. It guarantees a minimum axial force retention of 27 N both for the mating end and the opposite end, with a recommended torque setting provided. The mechanical integrity of the connector is underlined by its robust mating life specified at a minimum of 500 cycles.

Packaging and Compliance

Packaging follows the standard specification and is designed for 100 units while ensuring ready compliance with current quality standards. The product is subject to continuous improvement; Radiall reserves the right to apply any modifications deemed necessary.

Please note that more detailed specifications such as assembly instructions or additional features and benefits should be referenced directly from the full technical datasheet or by contacting Radiall directly.