Introduction

This instruction sheet provides programming instructions for key fob programming in various General Motors (GM) vehicles.

Important Note

These instructions will erase all previously learned transmitters, requiring relearning of additional transmitters.

Programming Steps

Follow these steps to program your key fob:

1. Press the vehicle information button until “PRESS TO RE-LEARN REMOTE KEY” displays.

2. Press the set/reset button until “REMOTE KEY LEARNING ACTIVE” is displayed.

3. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds.

A chime will sound indicating that the transmitter is matched.

Repeat Step 3 to match additional transmitters (up to a maximum of eight).

To exit the programming mode, cycle the key to LOCK/OFF.

Manual:

Download: AcQelco KEY FOB PROGRAMMING INSTRUCTIONS FOR 2006-2014 Buick, Cadillac, Chevrolet, Pontiac, and Saturn MODELS

Chat: Powered By VoiceSphere

Top Categories
Recent Manuals

Subscribe

Subscribe for Weekly email digest
Related Posts
No Thoughts on AcQelco KEY FOB PROGRAMMING INSTRUCTIONS FOR 2006-2014 Buick, Cadillac, Chevrolet, Pontiac, and Saturn MODELS