Welcome to the installation guide for your iDatalink Maestro RR Radio replacement solution.
This guide is designed to help you install your new car radio with enhanced features.
\
To start, ensure that your iDatalink Maestro module is programmed with the correct firmware for your vehicle. Then, carefully review the install guide and connect the wires shown on the next page from your aftermarket radio to the CHI T-harness and match the wire functions.
\
The guide also includes a wiring diagram and troubleshooting table to help you complete the installation.
For further assistance, please visit Maestro Support or contact 1-866-427-2999.
Installation Instructions
Step 1: Unbox the Aftermarket Radio and Locate its Main Harness
Connect the wires shown on the next page from the aftermarket radio main harness to the CHI T-harness and match the wire functions.
Step 2: Remove the Factory Radio
Remove the factory radio and access the main 22 pin factory radio connector (2.1).
Step 3: Connect the Harnesses
Connect all the harnesses to the Maestro RR module.
Step 4: Reassemble the Dashboard
Reassemble the dashboard carefully and plug in the aftermarket radio.
Manual:
Download: 2011-2014 Chrysler 200 Maestro RR Radio Replacement Installation Guide
Chat: Powered By VoiceSphere
