Campaign Information
Dealers must perform this Service Campaign whenever an affected vehicle is in the shop for any maintenance or repair.
Description of Issue
This bulletin describes the procedure to replace the inside belt molding and attach pads to the side view mirror seal, side view mirror hole, and glass run on certain Palisade vehicles experiencing wind and/or whistling noise while driving.
Service Procedure
There are three sections to this Service Procedure: Inside Belt Molding Replacement, Side View Mirror Hole and Base Pad Attachment, and Glass Run Pad Attachment.
Inside Belt Molding Replacement
Refer to the shop manual to remove the front door trim.
Side View Mirror Hole and Base Pad Attachment
Remove the side view mirror seal, place a foam pad around the wiring harness, insert the foam pad through the wiring harness hole, and attach the pad to the side view mirror seal.
Glass Run Pad Attachment
Remove the top corner of the front door glass run, attach the glass run pad directly onto the existing pad, and align the glass run pad to the rear of the existing pad.
Manual:
Download: 2020 Palisade (LX2) Technical Service Bulletin: Wind/Whistling Noise from Door Glass Area
Chat: Powered By VoiceSphere
