Important Notes
This supercharger kit is designed to work on stock vehicles. Vehicles with modifications may not be compatible with this kit as delivered and should be tested with a wide band oxygen sensor and fuel pressure gauge to determine if the air/fuel ratio is safe. Detonation will quickly damage an engine.
Pre-Installation Checklist
Before beginning this installation, please read through this entire instruction book and the Street Supercharger System RECOMMENDED TOOLS Owner’s Manual which includes the Automotive Limited Warranties Program and the Warranty Registration form.
Tools Needed
The following tools are recommended for installation:
- 3.8″ Socket and Drive Set: SAE & Metric
- 1.5″ Socket and Drive Set: SAE Metric
- 3/8″ NPT Tap and Handle
- Adjustable Wrench
- Combination Wrench: SAE and Metric
- Center Punch
- Springlock 3/8″ and 5/16″ Fuel Fitting
- Betiodec Disconnect Tool
- 10 Quarts SHICF Rated Quality Engine Oil
- Oil Filter and Wrench
- Flat #2 Screwdriver
- Phillips #2 Screwdriver
- Heavy Grease
- Silicone Sealer
- Drill Motor Pneumatic Right Angle
- 1/4″ Drill Bits
- Stepless Clamp Pliers
- 3/16″ Allen Wrench
- Wire Strippers and Crimpers
- Utility Knife
- O1-1/8″ Hole Saw
- Pliers
- Threadlocker (Blue)
- Thread Sealant
- Fuel Pressure Gauge
- Spark Plug Socket
- NEW Spark Plugs
Manual:
Download: Novi 2000 Supercharger Owner’s Installation Guide for the 2003-2006 Dodge Viper
Chat: Powered By VoiceSphere
