Installation Instructions
Before starting installation, make sure to read the instructions carefully and identify any damaged or missing parts. If you need help, contact the manufacturer at 1-866-340-3038.
Required Tools
You will need a Phillips-Head screwdriver, ratchet, Phillips socket, Mvrench, Screwariver, T30 bit, and M6 screw with washer.
Assembling the Cover
Remove the factory screws from six indicated locations and place the cover assembly on the front truck bed rail against the cab. Loosen the screws in the bulkhead assembly on both sides, then slide in the side rails. Reinstall and tighten the screws to attach the side rails to the cover assembly.
Positioning Side Rails & Clamps
First, remove the clamp assemblies from the package and match the letters on the clamps with the corresponding positions etched on the side rails. Hook the upper clamp into the inner channel of the tonneau cover side rails and adjust the position of the bottom hole on the clamps so they line up with the factory screw holes.
DO NOT over-tighten the clamps.
Installing Brackets
Use one screw with one washer each to fasten the brackets on both sides to the factory holes.
Manual:
Download: SOFT ROLL-UP TONNEAU COVER for HONDA RIDGELINE
Chat: Powered By VoiceSphere
