Introduction
The CURT 13204 Receiver Hitch is designed for use with the Nissan Rogue (excluding Krom) model. This manual provides step-by-step instructions for installation.
Installation Requirements
The installation requires the following tools and components:
- 8mm, 18mm, and 19mm sockets
- Socket extension
- Ratchet
- Torque wrench
- Wire pipe brush
- Screwdriver
Installation Steps
Follow these steps to install the CURT 13204 Receiver Hitch:
- Remove the lower underbody panels, if present
- Remove the tow hook bracket from the passenger side frame rail
- Lower the exhaust for ease of installation
- Raise the hitch into position and secure with hex bolts and conical washers
- Torque all 12mm fasteners to 86 LB-FT
- Reinstall the exhaust, if removed in step 3
Warranty and Safety Information
CURT Manufacturing LLC warrants this product to be free of defects in material and workmanship at the time of retail purchase. The warranty excludes liability for incidental or consequential loss or damage. Always wear safety glasses while installing this product.
Manual:
Chat: Powered By VoiceSphere
