Engineering Data Sheet
The SERIES J Relay is a non-latch, 2 pole double-throw (2 PDT) relay designed for use in a variety of applications. It features a qualified at 10 Amps to LEACH CORP CALIP: PINaJ-DIN Balanced-Force @RELAY COIL 28 VDC 3202.
Principle Technical Characteristics
The relay has contacts rated at 28 Vdc; 115 Vac, 400 Hz; 1 phase and 115/200 Vac, 400 Hz, 3 phases. It weighs a maximum of 0.088lb and has dimensions of case 1.01in X 0.51in x 1.00in.
Contact Electrical Characteristics
The relay has a contact rating of 12 Amps per pole and load at 28 Vdc, 115 Vac, and 400 Hz. It also has resistive, inductive, and motor-lamp overload and rupture characteristics.
Coil Characteristics
The relay has a nominal operating voltage of 28 Vdc, maximum operating voltage of 29 Vdc, and maximum pickup voltage of 18 Vdc. The coil resistance is 9 *10% at +25°C.
General Characteristics
The relay has a temperature range of 70°C to +125°C, minimum operating cycles (life) at rated load of 100,000, and dielectric strength of 1250 Vrms at sea level and 1000 Vrms at 80,000 ft.
Mounting Styles
The relay is available in various mounting styles, including A, D, and J, with different terminal types and coil voltage options
Terminal Types
The relay has four terminal types, including Terminal Type 1, Terminal Type 2, Terminal Type 3, and Terminal Type 4. Each type has a different finish and pinout configuration.
Wiring Diagram
The relay has a standard wiring diagram that shows the coil suppression for R, V coils only
Application Notes
The relay has various application notes, including mounting distance between relays, which defines the minimum distance required to ensure relay performance. It also includes notes on the use of relays in tracks and the importance of keeping a distance between relays.
Manual:
Chat: Powered By VoiceSphere
Pricing & Distributors: https://www.datasheets360.com/part/detail/j-g4n/8130373968713868113/