Series 181 Thru 183 90 Pin Staked Flex Jumpers
The Series 181 thru 183 90 Pin Staked Flex Jumpers are designed with thin, flexible solid copper conductors embedded between layers of tough, flexible, flame-retardant insulation. The standard cable insulation is white UL VW-1, Style 2643 flame-retardant Polyester (Mylar) adhesive, and the high-temperature flame-retardant cable insulation is Polyimide (Kapton) insulation with acrylic adhesive. The cable […]
AMP-LATCH Connectors (Continued) Universal Ejection Style Pin Headers, Military, Center and Dual Polarized; 2.54 *2.54 [.100 x .100] Centers
The AMP-LATCH connectors are universal ejection style pin headers designed for military and commercial applications. They are available in center and dual polarized configurations with 2.54 * 2.54 [.100 x .100] centers. Ordering Information When ordering, use the chart to determine the six-digit base part number for the desired post length, contact plating, and latch […]
Semi-Precision Power Wirewound Resistor – IRC T Series MIL-R-26 (RW); MIL-R-39007 (RWR) & Commercial Styles
General Description The IRC T Series semi-precision power wirewound resistors are designed for high-reliability applications, offering weldable and solderable leads, high thermal conductivity, and a silicone coat. Key Features Resistance range: 0.1 ohm to 300K ohms, with tolerance options of ±0.1%, ±0.5%, and ±1.0% Power rating: 1.0 to 14 watts, with special MIL-qualified construction available […]
COTS Extended Temperature Crystal Oscillators 5.0V Thru-Hole
Overview This datasheet presents a series of crystal oscillators designed for harsh environmental conditions, with a wide operating temperature range of up to +200°C. Key Features The oscillators feature a frequency range of 20kHz to 150MHz, tristate and non-tristate options, and stability options of ±75ppm to ±500ppm. They are suitable for thru-hole PCB applications, including […]
L.E.D. Assemblies & Hardware
L.E.D. Assemblies & Hardware Overview RGA offers a range of LED mounting hardware, holders, and complete LED assemblies designed to provide a low-cost, highly efficient method of assuring precise component alignment and assembly consistency. The products are manufactured using high-quality materials and meet UL specification 94V-0 flammability rating. They are available both assembled with RGA […]
TRIAD PoWE R TRANS FO RMER PC Mount: Single Primary M A G N 6 T | 0 9 F-IS8XP
Electrical Specifications The F-IS8XP has a maximum power of 7.5 VA, with a primary input of 115V at 50/60 Hz. It has a secondary output of 25.2V CT at 0.30 Amps in series, or 12.6V CT at 0.60 Amps in parallel. Construction and Safety The transformer is wound on a single channel nylon bobbin with […]
kHz RANGE CRYSTAL UNIT CYLINDER
Product Overview This datasheet describes the kHz RANGE CRYSTAL UNIT CYLINDER, a crystal unit product series from Epson Toyocom. Product Features The product series includes various types such as C-TYPE, C-2-TYPE, and C-4-TYPE, with frequency ranges from 20 kHz to 307.2 kHz. The products have a fundamental overtone frequency and are suitable for use in […]