XOZO2IAB SCR Series Thyristor
Overview The XOZO2IAB SCR series is a thyristor designed for applications where available gate current is limited, such as ground fault circuit interruptors, overvoltage crowbar protection in low power supplies, and capacitive ignition circuits. Features The device has a peak repetitive forward and reverse blocking voltage of 600/800/1000V, with an IT(RMS) of 1.25A. It is […]
Fully Enclosed Micro-Miniature SNAP-IN SWITCH and PLUG-IN SWITCH
Overview CW Industries offers fully enclosed micro-miniature switches with crisp detent action and mounting options for “Snap-In” or “Plug-In” configurations. These switches have solderless, solder, or PC termination options and are designed for use in hostile environments. Key Features • Microminiature size with light detent action • Completely enclosed contacts for environmental protection • Mounting […]
cOOPER Bussmann Low Voltage; Branch Circuit Rated Fuses Plug Fuses S and T Series Fustat Fuse Adapters
The datasheet presents the Cooper Bussmann S and T Series plug fuses and Fustat fuse adapters for low voltage branch circuit applications. Key Features: Time-delay, dual-element plug fuses with rejection feature to prevent overfusing of branch circuits. Fustat adapters for retrofitting existing fuse installations, available in various amp ratings. Applications: Plug fuse installations, single motor […]
POWE R TRANSFORMERS c H A $ $ / $ M 0 U N T 5 | N G L E 5 E C 0 N D A R Y M M M M
MagneTek offers a full range of TRIAD power supply transformers for direct use or in transformer-rectifier, or filter circuits. Other available secondary voltages include control, filament, and low-level signaling in standard values. The transformers are single primary with single and multiple secondaries in standard size and weight configurations. Specifications: Primary: 115/230 V, 50/60 Hz Single […]
Snap Action Switch V
General Purpose Snap Action Switch This datasheet describes a range of industry-standard snap action switches designed for applications requiring long life expectancy and high reliability. The switches are available in various models, including V-21, V-16, V-15, V-11, and V-10, with rated currents from 10A to 21A and operating forces from 100gf to 400gf. Features and […]
Outlet VAD 8/8 Ap Cat.6/Class E pure white, RAL 9010
Product Overview The Outlet VAD 8/8 Ap Cat.6/Class E is a surface mounting RJ45 connector with a pure white colour finish, conforming to RAL 9010 standards. Key Features Type: Surface mounting; ZxRJ45 Colour: Pure white RAL 9010 Note: Technical changes are reserved by Telegartner Karl Gartner GmbH. Manual: > Chat: Powered By VoiceSphere Pricing & […]
Molex Block Spade Terminals
Block Spade Terminals Overview This datasheet presents the specifications and characteristics of Molex block spade terminals, which are designed for 22 to 10 wire range connections. Key Features The terminals are made of copper, with KRIMPTITE and INSULKRIMPE (PVC insulation) or VERSAKRIMP (non-kibulfo insulation) options. The datasheet provides detailed dimensions, wire range, and part number […]
F Series Pushbutton Switches
Features and Benefits The F Series Pushbutton Switches offer various contact terminals, mounting and switch configurations, and are RoHS compliant. Typical Applications The switches are suitable for audio selection, digital equipment interface, and medical equipment interface. Specifications The F module has a maximum switching power of 50 VA/15 W, with an operating force of 2-9 […]
HSN Series N type Coaxial Connectors
The HSN Series N type Coaxial Connectors datasheet provides information on a range of connectors and adapters suitable for high-frequency applications. Key Features: Wide varieties of standard connectors Screw on locking mechanism Applicable to RG cable, JIS cable, and other standards Product Specifications The connectors have a nominal characteristic impedance of 50 ohms, operating frequency […]
Lumberg Leiterplatten-Direktsteckverbinder; Raster 2,5/2,54 mm
Direct Connectors for Printed Circuit Boards These connectors have a pitch of 2.5/2.54 mm and are designed for direct mating with printed circuit boards. Key Features Temperature range: 25°C to 100°C Materials: PPO, CuSn (nickel and tin plated) Contact resistance: <3 mΩ Rated current: 5 A Rated voltage: 250 V AC Test voltage: 2.1 kV […]