Triad Isolation Transformers
Overview Triad isolation transformers are designed to isolate equipment from direct connection to the power line, offering a range of voltages and case types. They are constructed with nonconcentrically wound coils, providing electrical isolation between primary and secondary windings. Features These transformers are available in hospital-grade versions (MD suffix) that meet low leakage current requirements […]
Series 112, 113, & 114 Deci-Center” TM Jumpers
General Information This datasheet describes the specifications and ordering information for Deci-Center” TM Jumpers, a series of jumpers with varying conductor counts and lengths. Cable and Header Details The cable details include the wire number, pin number, and dimensions for each series (112, 113, 114, 112X, 113X, 114X). The header detail includes pin dimensions and […]
155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-13/15-15S(C)-T(3)-Sxx3(4)
Overview This datasheet describes the 155 Mbps bi-directional receptacle single fiber transceiver, a high-speed transceiver module designed for SONET OC-3 SDH STM-1 applications. Key Features The transceiver features a diplexer single mode single fiber 1×9 SCIFCIST receptacle connector, with a wavelength of Tx 1310 nm/Rx 1530 nm. It operates with a single +5V/+3.3V power supply […]
Ultra Miniature Transformers: F Series Thru Hole and G Series Insulated Leads
The datasheet provides specifications and features of the Ultra Miniature Transformers: F Series Thru Hole and G Series Insulated Leads, manufactured by PICO Electronics. Key Features: These transformers are designed for high-frequency applications, offering ultra-miniature size, high resistance to thermal shock, and electrostatic shielding options. They are suitable for a wide range of applications, including […]
Lumberg PassION FOr CONNZCIIONS 2,5 R
Socket Board and Connector Overview This datasheet presents the Lumberg PassION connector series, featuring socket boards and connectors for direct mating with and without mounted flanges. Key Features The connectors have a temperature range of -25°C to +100°C and are made of PPO, with CuSn contacts that are nickeled and tinned. They are designed for […]
4000/3000 Series T1 Panel LED
The 4000/3000 Series T1 Panel LED is a single-piece body and lens construction available in various colors and lens styles. Key Features: Front mounting ribbed body “snaps into panel” without requiring mounting hardware Optional internal resistor for customization in AC applications Wide selection of wire sizes and types, including Mil Spec Sealed against moisture and […]
RHVTRC 7 HIGH ACCURACY SURFACE MOUNT CRYSTALS
The RHVTRC 7 series of surface mount crystals offers a high accuracy and stability over temperature range, making them suitable for telecom applications. Key Features: Frequency Range: 1.00 MHz to 360.00 MHz Frequency Tolerance: +3 PPM to +50 PPM Frequency Stability: Good stability over a wide temperature range Load Capacitance: 10 pF to 32 pF […]
RHVTRC 7 HIGH ACCURACY SURFACE MOUNT CRYSTALS
This datasheet describes high-accuracy surface mount crystals with tight tolerance and stability over temperature, suitable for telecom applications. Frequency Range: 1.00 MHz to 360.00 MHz, with various frequency tolerances and stability ranges. Holder Types and Characteristics A-SMD (HC-49/U-SMD) and C-SMD (UM-1-SMD) types, with equivalent series resistance (ESR) characteristics and frequency ranges. Part Numbering System A […]
THICK AND THIN FILM RESISTOR NUMBERING SYSTEM
Resistor Numbering System This datasheet describes the numbering system for thick and thin film resistors. Resistor Sizes and Materials The datasheet lists various sizes and materials for thin film and thick film resistors, including substrate materials such as Alumina, Beryllia, Silicon, Glass, and Quartz. Tolerances and Terminations The datasheet specifies tolerance codes and termination types, […]
BOARD TO BOARD CONNECTOR SMK CRIMPING CONNECTOR PB-5 Series (Pitch 0.5mm) SMT TYPE
Overview This datasheet presents the specifications and features of SMK’s board-to-board connectors, including the PB-5, PB-8, PB-10, HP, and EP series. The connectors have pitches ranging from 0.5mm to 2.5mm and are available in various configurations, including straight and right-angle plugs and sockets. Key Features Rated current: 0.5A, 1A, or 2A depending on the series […]