8-03AMMM-SL7OOO datasheet
Product Description This datasheet describes a waterproof cable connector with an IP67 rating. Key Features The connector has a male pin made of copper alloy with gold plating, and a cable length of 1-99 meters. The cable is 22AWG*3C+Insulation, with an outer diameter of 4.5mm, and has a tolerance of +40mm to +200mm depending on […]
RHTRO MICROPROCESSOR CRYSTAL UNITS SERIES A, B, C
This datasheet describes a series of microprocessor crystal units with a wide frequency range (100 kHz to 300 MHz) and industry-standard packages. The units are available in three holder types: HC-49/U, HC-51/U, and UM-1. Key Features Frequency range: 100 kHz to 300 MHz Frequency tolerance: ±30 ppm typical, ±50 ppm maximum Frequency stability over temperature: […]
Auris HC4IM HC49J HC49H Quartz SMD
Overview This quartz crystal is designed for high-reliability applications, particularly in the automotive industry, with an extended temperature range. Key Features Available in fundamental and overtone modes, with a frequency range of 3.5 MHz to 80 MHz. Load capacitance options of 10pF, 20pF, and 30pF, with a temperature tolerance of ±5ppm to ±30ppm. Operating temperature […]
INSULKRIMP Connectors Datasheet
Product Overview The INSULKRIMP connectors are copper terminals with electro-tin plating and PVC insulation, available in various stud sizes and wire ranges. Key Features Part numbers E-657X to E-660X, with stock thicknesses and maximum wire insulation diameters listed. Available stud sizes: 08, 10, 14, 56, 38, 76, and 12, with corresponding minimum and maximum values. […]
I Series Crystal
This datasheet presents the specifications and characteristics of the I Series Crystal, a 6.0mm x 3.5mm 2-pad ceramic package crystal oscillator. Key Features The I Series Crystal offers a wide frequency range from 10.000MHz to 80.000MHz, tight tolerance and stability, and operating temperature range from -40°C to +85°C. Electrical Characteristics The crystal oscillator has a […]
SERIES X RELAY NONLATCH 2 PDT, LOW LEVEL TO 5 AMP
Overview The SERIES X relay is a non-latch, 2-pole, double-throw (2PDT) relay with a low-level rating of up to 5 amps. Contact Characteristics The relay has a hermetically sealed, corrosion-resistant metal can and features polarized pins. The contact rating is 5 amps at 28 Vdc and 115/200 Vac, 400 Hz, with a maximum operating voltage […]
E5 SERIES TO STYLE RECEIVERS
Overview This receiver module is a transimpedance current-to-voltage converter, with an output voltage proportional to the input signal current. It is a high-gain, DC-coupled system that requires careful handling to prevent saturation and failure. Key Specifications The module features a silicon photodiode with a wavelength range of 300-1000 nm, and is available in various models […]
8845 Series Standard-Size Patch Cords
Product Features This series of patch cords is pre-assembled for quick and easy installation, and comes in ten popular colors for visual signal identification or personalization. Matching protective boots are included. Each assembly contains two KINGS@ Standard Size 75 Ohm patch plugs (7510-16) terminated to Belden 1694A or equivalent cable in a variety of lengths. […]
SHRINKABLE SEALING SLEEVE (LONG)
Overview This datasheet describes a shrinkable sealing sleeve with a long design, used for cable groups. The sleeve is available in various colors and has a specific polarization characteristic. Key Features • Shrinkable sealing sleeve for TDCL crimp hill-C-49142 • Available in different colors and polarization options • Long design with a maximum diameter of […]
8-03AFFM-SL7OOO Cable Assembly Datasheet
General Information The 8-03AFFM-SL7OOO cable assembly is a waterproof, IP67-rated connector with a UL2464 22AWG*3C + Talcum, black PVC jacket, and UV-resistant design. Key Features It has a female pin made of copper alloy, C gold plated, and a cable length tolerance of ±40mm (1m), ±60mm (2m), and ±100mm (3m-10m). Cable color options: black, blue, […]