4000/3000 Series T1 Panel LED
Overview The 4000/3000 Series T1 Panel LED is a single-piece body and lens construction available in various colors and plastic types. These LEDs feature front mounting with a ribbed body that “snaps into panel” without requiring mounting hardware. Key Features Optional internal resistor for AC applications, wide selection of wire sizes and types, and sealed […]
SERIES X RELAY NONLATCH 2 PDT, LOW LEVEL TO 5 AMP ENGINEERING DATA SHEET
The SERIES X relay is a low-level, non-latch 2 PDT relay with a rating of 5 amps. It is hermetically sealed and corrosion-resistant, with a metal can and a weight of 0.034lb max. Key Characteristics: Contacts are rated at 28 Vdc and 115/200 Vac, with a maximum operating voltage of 48 Vdc. The relay has […]
M2OOO series H2OOO series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/ITTL
The M2OOO series H2OOO series VCXO is a high frequency, low noise timing solution with a voltage range of 5.0V and a frequency range of 10 MHz to 175 MHz. The device features a start-up time of less than 5ms, a frequency stability of ±20ppm, and an operating temperature range of -40°C to 85°C. The […]
Lumberg PaSSION FOr CONNCCTIONS – Leiterplatten-Direktsteckverbinder; Raster 2,5/2,54 mm
Direct Connectors for Printed Circuit Boards These direct connectors are designed for printed circuit boards with a pitch of 2.5/2.54 mm. They are available with or without mounted flanges and are suitable for temperatures ranging from -25°C to +100°C. Key Features: Temperature range: -25°C to +100°C Materials: PPO, CuSn, nickeled and tinned Mechanical data: Mating […]
SMT COMMON MODE INDUCTORS 0.5A to 3.6A
This datasheet provides specifications for a range of SMT common mode inductors with current ratings from 0.5A to 3.6A. The inductors have a maximum reflow temperature of +235°C and are pick-and-place compatible. Key Features Rated voltage: 250VAC Low RFI toroid design Tape & Reel packaging available Electrical Specifications Leakage inductance tested at 100kHz, 1.14mV, with […]
BOARD TEST SPRING PROBES – S-0 SERIES 0.050 (1.27) Centers For R-0 Series Receptacles
This datasheet describes the S-0 series of spring probes, designed for testing boards with R-0 series receptacles. Probe Specifications The probes have a minimum center-to-center spacing of 0.050 inches (1.27 mm) and are available with different spring forces, travel distances, and materials. Materials The probes are constructed with various materials, including nickel-silver, beryllium copper, music […]
Rosenberger A-XX-5-N A-XX-5-N-01 Technical Data Sheet
This datasheet describes a coaxial attenuator with excellent capacity in anti-pulse and anti-burnout, high reliability, and a flatness attenuation value. Electrical Data The attenuator has an attenuation value and accuracy of +0.4 to +0.7 dB, with a frequency range of DC-3GHz or DC-4GHz depending on the part number. Environmental Data The operating temperature range is […]
TeraSPEED@ Plenum Distribution Cable; interlocking aluminum armored with plenum jacket; 12 fiber single-unit
Product Overview This datasheet describes the TeraSPEED@ Plenum Distribution Cable, a 12-fiber single-unit cable with an interlocking aluminum armored construction and a plenum jacket. Key Features The cable is designed for indoor use and meets various standards, including ANSI/ICEA S-83-596 and Telcordia GR-409. It has a composite construction with a gel-free design and features OM3 […]
Series 181 Thru 183 90 Pin Staked Flex Jumpers
Aries 90° Pin Staked Flex Jumpers are designed with thin, flexible solid Copper conductors embedded between layers of tough, flexible, flame-retardant insulation. General Specifications: The standard cable insulation is white UL VW-1, Style 2643 flame retardant Polyester (Mylar) adhesive, and high-temperature flame retardant cable insulation is Polyimide (Kapton) insulation with acrylic adhesive. Cable conductors are […]
Tyco Electronics PANFL-UT-Jut Seal
Overview The Tyco Electronics PANFL-UT-Jut is a surface-mounted seal with a Neoprene Flark Flalye rubber element and a Steel clip. Key Features Material: Aluminium Diecasting Alloy Seels with Neoprene rubber element Surface Finish: Aluminium oxide Varnish with Black Grey color Packaging: 5 pieces in a JCX tube The seal is designed for surface mounting with […]