AQO 3225 Oscillator SMD, Clock-Type

Overview The AQO 3225 is a low-cost, high-performance oscillator designed for laptop and handheld PDA applications. It features a small size of 3.2×2.5 mm, tristate or power-down capabilities, and operates at a frequency range of 1.0 MHz to 50.0 MHz with various tolerance options. Key Specifications Operating temperature range: -40°C to +85°C (or -55°C to […]

4000/3000 Series T1 Panel LED

Overview The 4000/3000 Series T1 Panel LED is a high-efficiency LED assembly with a one-piece body and lens construction available in various colors. Key Features: Front mounting ribbed body that “snaps into panel” with no mounting hardware required Available in smooth body for thinner panels, mounting with Tinnerman nut Optional internal resistor for customization in […]

mechanical component datasheet

-mechanical-component-datasheet.pdf

Dimensions The datasheet appears to be for a mechanical component with various dimensions. Bore diameters mentioned are 1.024 (26.01), 1.406 (35.7), and 1.656 (42.06). Other dimensions include 254 (6.45), 307 (7.80), 344+.020 (8.74), 360+ 020 (9.14+ 51), and more. Hole and Travel Information Two holes are mentioned, with diameters of 254 (6.45) and 022 (.56). […]

9mm Snap-In Insulated Shaft Potentiometer

9mm-snap-in-insulated-shaft-potentiometer.pdf

Overview This datasheet describes a 9mm snap-in insulated shaft potentiometer with a taper resistance valve. Electrical Characteristics The potentiometer has a resistance range of 15kΩ to 35kΩ with a tolerance of ±30%. The rated power is 0.03W. Mechanical Characteristics The potentiometer has a total rotational angle of 280° ±59° and a rotational torque of 10 […]

YETDA DOT MATRIX DISPLAY Chip Face Dot Part Number Emitter Color Color Material AD(nm) Color 1.0″ 5 x 8 Dot Matrix Display

yetda-dot-matrix-display-chip-face-dot-part-number-emitter-color-color-material-adnm-color-10-5-x-8-dot-matrix-display.pdf

Overview This datasheet presents the specifications and characteristics of a 1.0″ 5 x 8 dot matrix display. Device Options The display is available in various emitter colors, including Red, Orange, Yellow Green, Yellow, Blue, and Pure Green, achieved through different material combinations such as AIGaAs/GaAs, GaAsP/GaP, and IInGaN. The datasheet provides detailed information on the […]

Isolated Power Dividers

isolated-power-dividers.pdf

Overview RLC Electronics offers a range of compact, microstrip-based isolated power dividers with 3, 6, 9, and 12 ways, featuring wide bandwidth, low VSWR, and high isolation between output ports. Key Features Specifications: 10 watts average power, 50 ohms impedance, and SMA female connectors. Customization: Special requests can be accommodated, including different frequency ranges, connectors, […]

4000/3000 Series T1 Panel LED

40003000-series-t1-panel-led.pdf

Overview The 4000/3000 Series T1 Panel LED is a high-efficiency LED assembly featuring a one-piece body and lens construction available in various colors and lens styles. Key Features Front mounting ribbed body with no mounting hardware required, optional internal resistor for AC applications, and a wide selection of wire sizes and types including Mil Spec. […]

8845 Series Patch Cords – Standard Size Patch Cord Cable Assembly

8845-series-patch-cords---standard-size-patch-cord-cable-assembly.pdf

This datasheet presents the 8845 Series Patch Cords, a pre-assembled cable assembly for quick and easy installation. Key Features: Available in 10 popular colors for visual signal identification or personalization, with matching protective boots included. Each assembly contains two KINGS Standard Size 75 Ohm patch plugs (7510-16) terminated to Belden 1694A or equivalent cable in […]

Lumberg PassION FOr CONNCCIIDNS

lumberg-passion-for-conncciidns.pdf

Overview This datasheet presents the PassION connector series, a range of connectors for direct mating with and without mounted flanges. Key Features The connectors have a temperature range of 25°C to 100°C and are made of PPO insulating material with CuSn contacts that are nickel-plated and tin-plated. The connectors are designed for use with printed […]

1.25 Gbps Bi-directional Single Fiber Transceiver

125-gbps-bi-directional-single-fiber-transceiver.pdf

The B-13/15-1250(C)-TPM3-SXX-60 is a bi-directional single fiber transceiver that operates at 1.25 Gbps. Key Features: Coaxial single mode single fiber package with optional SC/FC/ST connector Compliant with IEEE 802.3z Gigabit Ethernet Single +3.3V power supply LVPECL differential inputs and outputs Wave solderable and aqueous washable Performance: The transceiver has a wavelength of 1310 nm (Tx) […]