TOA Series Type OA Clip Terminal
The TOA Series Type OA Clip Terminal is a RoHS compliant component with a current rating of 3 Amp. Physical Characteristics The terminal has a brass body with a machined CuZn38Pb2 pin, and is made from beryllium copper or PHBZ material with tin plating over nickel. Dimensions The terminal has a standard sleeve with a […]
750 FOUR Post RIGHT ANGLE CIRCUIT BOARD Mount Mini BNC RECEPTACLE
Overview This datasheet describes a mini BNC receptacle with a right-angle circuit board mount. Key Features The receptacle has a four-post design and is available with different finish options, including nickel and gold. The recommended mount hole pattern is provided, with a scale of 2:1. Please note that unless otherwise specified, certain dimensions and finishes […]
Quartz SMD Ceramic HC3225/4 RoHS 2011/65/EU
This datasheet presents the specifications of the HC3225/4, a high-reliability SMD ceramic quartz crystal oscillator suitable for Bluetooth and wireless LAN applications. Key Features Ultra-thin and small leadless type, with a frequency range of 10.0 MHz to 150.0 MHz. Fundamental mode oscillation, with a temperature tolerance of ±10 ppm to ±3 ppm, depending on the […]
Feldmeier 2-8pos AMP Connector
Overview The Feldmeier 2-8pos AMP connector is a polarization rib connector with a keying system for secure mating. It has a double wire for 0.5-0.5+0.75mm wire range and a single wire for 0.35-1.0mm wire range. Key Features The connector has a special locking device between cavities, with a mating stop and keying rib on the […]
Outdoor Non-Armored, AII-Dielectric, Arid-Core; Dry Central Tube Ribbon Cable
Product Overview This datasheet describes a fiber optic cable designed for outdoor use, featuring a non-armored, all-dielectric, arid-core construction with a dry central tube. Key Specifications The cable has a total fiber count of 72, with 12 fibers per ribbon, and a black, UV-stabilized jacket. It meets various standards, including ANSI/ICEA S-87-640 and Telcordia GR-20. […]
Auris HC4IU Quartz THT
General Information The Auris HC4IU is a quartz crystal resonator available in industry-standard packages with a wide frequency range and low equivalent series resistance (ESR). Key Specifications The device operates in fundamental and overtone modes, with frequencies ranging from 1.8432 MHz to 180 MHz. It has a frequency tolerance of ±3 ppm to ±50 ppm […]
P1 Relay
General Information The P1 Relay is a polarized, Through Hole Type (THT) or Surface Mount Technology (SMT) telecom and signal relay. Key Features – Directly triggerable with TTL standard modules – Slim line design (13.5 x 7.85 mm, 0.531 x 0.309 inch) – High sensitivity results in low nominal power consumption (65 to 130 mW […]
auris AQO 5032 Oscillator SMD, clock-type
Overview The AQO 5032 is a small-sized (5×3.2mm) oscillator suitable for laptop and handheld PDA applications. It offers a low cost-to-performance ratio and is available in tristate or power down options. Key Specifications Frequency range: 1MHz to 125MHz Frequency stability: ±10ppm to ±100ppm Operating temperature: -40°C to +85°C Input voltage: 1.8V to 5.0V Current: 20mA […]
Lumberg PaSSiON FOr CONNECtiONS 51 2,54 U
The datasheet describes a direct connector for insert cards with a pitch of 2.5/2.54/5.0/5.08 mm, featuring a socket board for direct mating with solder eyes. The connectors are currently phasing out. Key Features Operating temperature range: -25°C to +100°C Materials: Insulating body made of PPO, contact spring made of CuSn, pre-nickel and tin-plated Mechanical data: […]