155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-13/15-155-T(3)-SXX5(7)
Overview The Luminent 155 Mbps Bi-directional Receptacle Single Fiber Transceiver is a high-speed optical transceiver module designed for SONET OC-3 SDH STM-1 applications. Key Features The module features a diplexer single mode single fiber receptacle connector, operates at a wavelength of 1310nm/1530nm, and supports PECL/LVPECL differential inputs and outputs. Compliance and Standards The module complies […]
UTC XOZO2IAB SCR Series Datasheet
Overview The UTC XOZO2IAB SCR series is suitable for all applications where the available gate current is limited, such as ground fault circuit interruptors, overvoltage crowbar protection in low power supplies, and capacitive ignition circuits. Features The device is available in SOT-223 and TO-92 packages, with a peak repetitive forward and reverse blocking voltage of […]
Lumberg PaSSION FOr CONNCCTIONS
Direct Connectors for Printed Circuit Boards These connectors have a pitch of 2.5/2.54 mm and are available with and without a mounted pair of flanges. Key Features: Temperature Range: -25°C to +100°C Materials: PPO insulating body, CuSn contacts, nickeled and tinned Mechanical Data: Mating with printed circuit board 1.5 + 0.14 mm Electrical Data: Contact […]
3M TM IC Sockets Programming (ZIP DIP)
The datasheet describes 3M’s IC sockets and receptacles, including ZIP DIP, LCC, PQFP, and Shrink DIP products. The sockets and receptacles are designed for various applications, including field programmable devices, OEM production, and end-use applications. Key Features ZIP DIP sockets and receptacles with lever actuated zero insertion force mechanism for easy insertion and withdrawal without […]
I Series Crystal Oscillator
The I Series Crystal Oscillator is a ceramic package oscillator with a frequency range of 10.000 MHz to 80.000 MHz, available in various frequencies with tight tolerance and stability. Key Characteristics The oscillator operates in fundamental or 3rd overtone mode, with a drive level of 0 Op watts maximum. It has a high insulation resistance […]
P-004-DS-SL-FSURD LazrSPEED@ Plenum Distribution Cable; 4 fiber single-unit
The LazrSPEED@ Plenum Distribution Cable is a 4-fiber single-unit cable designed for indoor use. It features a non-armored, gel-free construction with a red jacket color and has a total fiber count of 4. General Specifications The cable has a diameter of 4.25 mm (0.167 in) over the jacket and features Aramid yarn and a ripcord […]
SERIES J RELAY NONLATCH 2 PDT, 12 AMPS ENGINEERING DATA SHEET
Overview The SERIES J relay is a non-latch, 2-pole, 12-amp relay with a welded construction and balanced-force contacts. It is qualified at 10 Amps to MIL-PRF-83536. Technical Characteristics The relay has a operating voltage of 28 Vdc or 115/200 Vac, 400 Hz, and a contact rating of 12 amps per pole. It weighs a maximum […]
Series 181 Thru 183 90 Pin Staked Flex Jumpers
Aries 90° Pin Staked Flex Jumpers combine thin, flexible solid Copper conductors embedded between layers of tough, flexible, flame-retardant insulation. General Specifications: Cable conductors are solid Copper with a cross-sectional area equivalent to that of 26 gauge AWG. Female housing is black UL 94V-0 Glass-filled Stanyl 4/6 Nylon. Customization Options: Aries specializes in custom design […]
Series 181 Thru 183 90 Pin Staked Flex Jumpers
Aries 90° Pin Staked Flex Jumpers combine thin, flexible solid Copper conductors embedded between layers of tough, flexible, flame-retardant insulation. These jumpers are available in various lengths and can be customized with special materials, platings, and sizes. General Specifications The standard cable insulation is white UL VW-1, Style 2643 flame retardant Polyester (Mylar) adhesive. The […]
COTS Extended Temperature Crystal Oscillators 5.0V Thru-Hole
This datasheet describes a series of crystal oscillators designed for high-frequency and low-phase noise timing applications. The devices operate over a wide frequency range (20KHz to 150MHz) and are available in non-tristate and tristate options. The oscillators are designed to withstand harsh environmental conditions, with operating temperatures ranging from -55°C to +200°C, and are suitable […]