H-3-CPUSE-43-Al6 Low PIM Air Dielectric Hybrid Coupler; 555-2700 MHz

h-3-cpuse-43-al6-low-pim-air-dielectric-hybrid-coupler-555-2700-mhz.pdf

General Information This hybrid coupler is suitable for indoor/outdoor use and has a silver color. It features a 4.3-10 female interface with trimetal outer contact plating and silver inner contact plating. Performance The coupler has a low insertion loss of 0.2 dB, high return loss of 20.8 dB, and strong coupling of 3.1 dB. It […]

RHVTRC 7 HIGH ACCURACY SURFACE MOUNT CRYSTALS

rhvtrc-7-high-accuracy-surface-mount-crystals.pdf

Overview The RHVTRC 7 is a high-accuracy surface mount crystal featuring tight tolerance and stability over temperature. It has a wide frequency range, making it an excellent frequency source for telecom applications. Key Features Frequency range: 1.00 MHz to 360.00 MHz Frequency tolerance: +3 ppm to +15 ppm Load capacitance: 10 pF to 32 pF […]

LUmberg PaSSiON FOr CONNECtiONS 31 2,5 MBPH

lumberg-passion-for-connections-31-25-mbph.pdf

Overview This datasheet describes the Minimodultm connectors with a pitch of 2.5 mm, featuring a minimodult socket board with consecutive placement without loss of pitch, angular, and with locking hooks. Key Characteristics The connectors are designed to operate in a temperature range of -40°C to +120°C, with a rated current of 5 A and rated […]

Quartz SMDCeramic auris AC7050/2 AC7050/4 RoHS 2002/95/EC

quartz-smdceramic-auris-ac70502-ac70504-rohs-200295ec.pdf

The datasheet describes the AC7050/2 and AC7050/4 quartz SMD ceramic products, which are high-reliability, ultra-thin, and small leadless type devices designed for high mechanical demands. Key Features These devices operate in the frequency range of 6.0 to 27.0 MHz, with a frequency tolerance of ±10 ppm to ±50 ppm, and a temperature range of -20°C […]

LUmberg PaSSiON FOr CONNECtiONS 51 2,5 R

lumberg-passion-for-connections-51-25-r.pdf

Direct Connectors for Insert Cards These direct connectors have a pitch of 2.5/2.54/5.0/5.08 mm and are designed for direct mating with socket boards featuring solder pins. Environmental and Mechanical Data The operating temperature range is -25°C to +100°C. The insulating body is made of PPO, and the contact spring is CuSn with a pre-nickel and […]

690/700 Volt PSc Square Body

690700-volt-psc-square-body.pdf

Overview Mersen’s 690/700V PSC square body fuses provide maximum flexibility in equipment design and ultimate protection for power conversion equipment. These fuses are available in four different body sizes, each with multiple worldwide acceptable mounting styles. Features and Benefits Key features include: Choice of mounting styles for design flexibility Broad range of ampere ratings in […]

Oscillator SMD_programmable APQO 7050

oscillator-smdprogrammable-apqo-7050.pdf

The APQO 7050 is a programmable oscillator that operates on a supply voltage of 3.0 to 5.5 volts and has a frequency range of 1MHz to 133MHz. Key Features: Rohs compliant, small size 7x5mm, low cost to performance ratio, and ultra-low jitter of

LazrSPEED@ Plenum Distribution Cable; 6 fiber single-unit

lazrspeed-plenum-distribution-cable-6-fiber-single-unit.pdf

Product Overview This datasheet describes the LazrSPEED@ Plenum Distribution Cable, a 6 fiber single-unit cable designed for indoor use. Key Features This cable features a non-armored, gel-free construction with a red jacket color and a diameter of 4.74mm. It has a minimum bend radius of 71mm and can withstand a tensile load of up to […]

Metallized Polyester Capacitors

metallized-polyester-capacitors.pdf

General Features The datasheet describes metallized polyester capacitors with a stacked layer construction and radial tinned copper leads. These self-healing capacitors have an epoxy resin dipped coating. Ordering code, rated capacitance, tolerance, and rated voltage (UR) are specified. Technical Data Climatic category, damp heat test, solder conditions, self-inductance, dissipation factor, and capacitance drift are outlined. […]

Series 181 Thru 183 90 Pin Staked Flex Jumpers

series-181-thru-183-90-pin-staked-flex-jumpers.pdf

The Series 181 Thru 183 90 Pin Staked Flex Jumpers are designed with thin, flexible, solid copper conductors embedded between layers of tough, flexible, flame-retardant insulation. The jumpers have a standard cable insulation of white UL VW-1, Style 2643 flame retardant Polyester (Mylar) adhesive, and high-temperature flame retardant cable insulation of Polyimide (Kapton) insulation with […]