9mm Snap-In Insulated Shaft Potentiometer R-0901G Datasheet
General Information This datasheet presents the R-0901G, a 9mm snap-in insulated shaft potentiometer with a taper resistance characteristic. The device has a full CCW shaft rotation angle of 280° ± 59° and a rotational torque of 10 ~ 80 gf.cm. Electrical Characteristics The potentiometer has a resistance range of 15kΩ to 35kΩ with a tolerance […]
F Series Pushbutton Switches
Overview The F Series Pushbutton Switches are designed for various applications such as audio selection, digital equipment interface, and medical equipment interface. Key Features • Up to 10 poles per module • Various contact terminals and mounting options • RoHS compliant and compatible • Silver or gold contact material available Switch Specifications • Switching power: […]
44AO211-12-94 Hook Up Wire, Spec 44, 1000V Voltage Rating, White with Yellow Stripe Wire Color, 12AWG Wire Size, Operating Temperature Range -65°C to 150°C
Product Overview This datasheet describes a hook-up wire that meets Spec 44 standards, with a 1000V voltage rating and a white with yellow stripe wire color. Key Features The wire has a 12AWG wire size, a modified radiation cross-linked PVDF insulation material, and a tin-coated copper conductor material. The operating temperature range is -65°C to […]
BOARD TEST SPRING PROBES S-0 SERIES
The S-0 series board test spring probes are designed for use with R-0 series receptacles. These probes have a center-to-center spacing of 0.050 inches (1.27 mm) and are available with different tip styles and spring forces. Probe Specifications: Minimum centers: 0.050 inches (1.27 mm) Current rating: 3 A continuous Spring force options: 2.20 oz (62 […]
SERIES X RELAY NONLATCH 2 PDT, LOW LEVEL TO 5 AMP ENGINEERING DATA SHEET
Overview The SERIES X relay is a non-latch 2 PDT relay with a low level rating of up to 5 amps. It is hermetically sealed and has a corrosion-resistant metal can. The relay is qualified to MIL-PRF-6106 and has a weight of 0.034lb max. Key Characteristics Contact arrangement: 2 PDT Contact rating: 5 amps resistive, […]
POST HEADER ASSEMBLY, SQUARE PIN VERTICAL TYPE, mm PITCH METRIC INTERCONNECT SYSTEM
Overview This datasheet describes the specifications and dimensions of a post header assembly, featuring square pins with a vertical type and mm pitch metric interconnect system. Key Features The assembly is made of nylon 66 (UL94V-0) with post-tin lead plated brass material. It has a specific pin layout and dimensions, with a recommended PC board […]
Hook Up Wire, Spec 55, 1000V Voltage Rating, White Wire Color, 16AWG Wire Size, Operating Temperature Range -65°C to 150°C
The specified hook-up wire is a high-performance Spec 55 wire with a 1000V voltage rating and a white wire color. It features a modified radiation cross-linked ETFE polymer insulation and tin-coated copper conductor material. Key Features: The wire has a 16AWG wire size, 19 strands, and an overall outside diameter of 1.828 mm (.087 in). […]
M2OOO series H2OOO series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/ITTL
Valpey Fisher Corporation’s M2OOO series H2OOO series VCXO is a high-frequency, low-noise timing solution with a voltage range of 5.0V. These VCXOs are available in full and half sizes, with thru-hole mounting and HCMOS/ITTL outputs. Key Features Frequency range: 1 MHz to 175 MHz Start-up time: Less than 1 ms RoHS compliant Applications xDSL customer […]
9mm Snap-In Insulated Shaft Potentiometer R-0901G
Product Overview The R-0901G is a 9mm snap-in insulated shaft potentiometer with a taper resistance value and a shaft length of 15mm. Electrical Characteristics The potentiometer has a rated power of 0.03W and a resistance tolerance of ±30%. It also features a maximum operating voltage of 250V AC/DC and an insulation resistance of 100MΩ min. […]
2-104503, 1-104503, 7-103896, 2-103896, 1-103896 AMPMODU MTE; PLC PRODUCT SPEC
Product Description This datasheet describes a single-row, PLC (Programmable Logic Controller) product with guide ribs, suitable for 08-25034 PLC 02 applications. Key Features Contacts are latched into the preload windows, and the product is designed for use with #26-#30 AWG wire size, 0.054″/0.030″ insulation diameter, and 0.015″ maximum insulation thickness. Plating and Finish The contacts […]