CERAMIC DISC CAPACITORS CLASS 2 (MEDIUM K DIELECTRIC) SPECIFICATIONS
Summary Ceramic disc capacitors with medium K dielectric are designed to operate within a temperature range of -30°C to +85°C. They have a capacitance tolerance of ±10% and a dielectric strength of 2.5 times the rated working voltage. The capacitors have an insulation resistance of at least 10,000 MΩ when measured at the rated working […]
IDC Flat Ribbon Cable GIC EMEA Product Guide
Introduction This guide illustrates the broad range of ribbon cables available through the AMP and Ansley brands. All products are sold in a standard unit of measure of Metres. Featured Products The guide features various types of ribbon cables, including: Standard 1.27mm Flat Cable (Ansley 171G Series) Cost-effective standard grey ribbon cable (AMP 971111 and […]
LUmberg PaSSiON FOr CONNECtiONS – 2,5 RFL
This datasheet describes a range of direct connectors for insert cards with a pitch of 2.5/2.54/5.0/5.08 mm. The connectors feature a socket board with mounted pair of flanges (FL) and solder pins, and are suitable for mating with printed circuit boards. Key Characteristics: Operating temperature range: -25°C to +100°C Contact resistance: 53mΩ Rated current: 5 […]
COAXIAL CONNECTORS N Series
Overview The N Series coaxial connectors are mid-sized, threaded coupling connectors that conform to general purpose standards (MIL-C-39012, JIS C 5411), with frequencies ranging from DC to 2GHz. Key Features High performance with VSWR (voltage standing wave ratio) of 1.2 or less, and a wide range of products for various mounting styles. Environmental rugged construction […]
LightScope ZWP@ AII-Dielectric Self-Supporting Outdoor Cable, 6-144 fiber Arid Core construction, stranded loose tube
Product Overview This datasheet describes the CommScope Fiber OSP cable, a non-armored, gel-filled, stranded loose tube construction cable designed for outdoor use. It features a PE outer jacket, aramid strength elements, and 24 fibers (G.652.D and G.657.A1) in 3.0mm buffer tubes. Key Specifications Total fiber count: 24 Jacket material: PE Jacket color: Black (UV stabilized) […]
I Series Crystal Oscillator
The I Series Crystal Oscillator is a ceramic package with two pads, offering a wide frequency range and tight tolerance and stability. Key Features: Frequency range: 10.000 MHz to 80.000 MHz Operating temperature range: -40°C to +85°C Storage temperature range: -40°C to +125°C Low ESR (Equivalent Series Resistance) and high insulation resistance. Environmental and Mechanical […]
YETDA DOT MATRIX DISPLAY Chip VF (V) Face Dot Part Number
This datasheet describes a series of dot matrix displays with various emitter colors and sizes. Displays: Two display sizes are available: 0.7″ 5×7 dot matrix and 1.22″ 5×7 dot matrix. Emitter Colors: The displays come in a range of emitter colors, including Red, Orange, Yellow Green, Yellow, Blue, Pure Green, and White. Part Numbers: Each […]
4000/3000 Series T1 Panel LED
Overview The 4000/3000 Series T1 Panel LED is a single-piece body and lens construction available in various colors and package options. Key Features Front mounting ribbed body with no mounting hardware required, optional internal resistor for AC applications, and a wide selection of wire sizes and types including Mil Spec. The LED assemblies are sealed […]
Standard Low Pass Filters
RLC Electronics’ Standard Low Pass Filters offer a range of cutoff frequencies from 100 MHz to 18 GHz, with miniaturization achieved through advanced coaxial techniques and optimal material selection. Key Features: These filters combine minimum insertion loss and low VSWR in the pass band, with sharp skirt selectivity and high rejection in the stop band. […]
POWER TRANSFORMERS PCMOUNT MM
