Series X508 Single and Dual Row Collet Sockets with Wire Wrap Pins

Overview Aries collet sockets are available in single or dual rows, cuttable to the desired number of pins, and side-to-side and end-to-end stackable. Materials and Specifications The body material is black UL 94V-0 Nylon 4/6, while the pin body is Brass Alloy 360 1/2 hard. Pin body plating options include 10u min. Gold, 200u min. […]
9mm Snap-In Insulated Shaft Potentiometer

Electrical Characteristics This potentiometer has a resistance range of 1kΩ to 250kΩ, with a tolerance of ±30%. It has a power rating of 0.03W and a maximum operating voltage of 250V AC/DC. The insulation resistance is 100MΩ minimum, and the withstand voltage is 250V AC for 1 minute. The working life is 15,000 cycles minimum. […]
Metalized Polyester Capacitors

General Description A stacked layer construction self-healing capacitor with polyester as dielectric and epoxy resin dipped radial tinned copper leads. Key Features Climatic category in accordance with DIN 40040 and IEC 384-2. Damp heat test in accordance with DIN 40046. Self-inductance (nH) and dissipation factor tg δ (measured at 20°C) are specified. Capacitance drift is […]
Air Conditioning; Refrigeration & Appliance Transformers

Transformer Specifications This datasheet provides specifications for air conditioning, refrigeration, and appliance transformers. Groups and Characteristics The transformers are categorized into three groups: GROUP B, GROUP €, and GROUP D. GROUP B transformers have primary voltage taps of 230-260, 210-239, and 189-217, with nominal secondary voltage of 115. GROUP € transformers have primary voltage of […]
Outlet UMJ45 IA 2×8(4) SK Ap alpine white

Product Overview The UMJ45 IA 2×8(4) SK Ap outlet is a design-capable ISDN SO outlet that comprises an installation system based on 8-pole RJ45 jacks according to the standard EN60603-7 for ISDN SO bus. Key Features Unshielded, compact, and ergonomic construction with secure hold during installation. Stand-alone surface mounting type available with no surface mounting […]
Auris AQO 7050 Oscillator SMD; clock-type RoHS

Overview The Auris AQO 7050 is a small, low-cost oscillator suitable for laptops and handheld PDA’s. It comes in a small 7x5mm package and offers tristate or power down capabilities. Key Features: Frequency range: 1MHz to 16MHz Frequency stability: ±25ppm, ±100ppm, and ±150ppm options available Operating temperature: -40°C to +105°C Input voltage: 1.8V, 2.5V, 3.3V, […]
TeraSPEED@ Low Smoke Zero Halogen Riser Distribution Cable

Product Overview This datasheet describes the TeraSPEED@ Low Smoke Zero Halogen Riser Distribution Cable, a fiber indoor cable designed for use in Asia, Australia/New Zealand, EMEA, Latin America, and North America. Key Features The cable features an interlocking aluminum armor and a low smoke zero halogen riser jacket, with 8 fibers in a single-unit configuration. […]
P-144-OD-SG-FMUBK LazrSPEEDO Indoor/Outdoor Plenum Distribution Cable

Product Overview This datasheet describes the P-144-OD-SG-FMUBK LazrSPEEDO Indoor/Outdoor Plenum Distribution Cable, a 144 fiber multi-unit with 12 fiber subunits for use in Asia, Australia/New Zealand, Latin America, Middle East/Africa, and North America. Key Specifications The cable features a gel-free subunit type, black jacket color, and a diameter over jacket of 30.3 mm (1.193 in). […]
U-LD-66ASSIA-preliminary 660nm Laser Diode

Device Overview The U-LD-66ASSIA is a 660nm red laser diode in a TO-18 package with a Pb-free glass cap. Key Characteristics Operating current: 280-310mA, operating voltage: 2.3-2.5V, and threshold current: 110-115mA. Slope efficiency: 0.5-0.85, beam divergence: 11-17° (parallel) and 10-27° (perpendicular). Lasing wavelength: 655-665nm. Precautions and Safety Handling and assembly of the laser diode may […]
Broadband Miniature Attenuators

RLC Electronics offers precision impedance matching attenuators that meet the full requirements of MIL-C-39012 and provide bi-directional handling over a broad frequency range of DC to 18 GHz. Key Features: Available in standard attenuation values or custom values for specific requirements. Three combinations of connectors are available in the standard models. Unique construction using resistive […]