I Series Crystal
Overview The I Series Crystal is a ceramic package crystal oscillator with a frequency range of 10.000 MHz to 80.000 MHz. It has a tight tolerance and stability, and is available in a variety of operating temperature ranges. Key Features The crystal oscillator has a 6.0 mm x 3.5 mm 2-pad ceramic package and is […]
R-012-DS-8W-FSURS TeraSPEED@ Riser Distribution Cable; 12 fiber single-unit
This datasheet describes the TeraSPEED@ Riser Distribution Cable, a 12-fiber single-unit cable designed for indoor fiber optic applications. General Specifications The cable has a rose-colored jacket, a gel-free subunit type, and a diameter of 5.95 mm (0.234 in). It features a non-armored construction with a 900 μm tight buffer and 250 μm optical fiber. Mechanical […]
CSM_Z_DS_E_4_4: General-purpose Basic Switch
Description This datasheet presents the features and specifications of Omron’s general-purpose basic switch, which boasts high precision and a wide variety of contact forms. Key Features High switching capacity of 15 A with high repeat accuracy Wide range of variations in contact form, including basic, split-contact, maintained-contact, and adjustable contact gap types Micro load series […]
RHVTRC 7 HIGH ACCURACY SURFACE MOUNT CRYSTALS
This datasheet describes the RHVTRC 7 high accuracy surface mount crystals, featuring tight tolerance and stability over temperature, suitable for telecom applications. Key Features Frequency range: 1.00 MHz to 360.00 MHz Frequency tolerance: +3 ppm to +25 ppm at 25°C Load capacitance: 10 pF to 32 pF (parallel) or series Mode of oscillation: Fundamental to […]
Series 100 thru 111 DIP Jumpers
This datasheet describes a series of DIP (Dual In-Line Package) jumpers with various configurations and options. Series Overview The series includes 12 different models (Series 102-111), each with its own set of characteristics and specifications. Key Features The jumpers have wire lengths ranging from 1″ to 2″ (25.4mm to 50.8mm) and cable lengths ranging from […]
T SERIES MIL-R-26 (RW); MIL-R-39007 (RWR) & COMMERCIAL STYLES SEMI-PRECISION POWER WIREWOUND RESISTORS
Overview The T Series of semi-precision power wirewound resistors are designed to meet the requirements of MIL-R-26 and MIL-R-39007, with commercial styles also available. These resistors feature weldable and solderable leads, high thermal conductivity ceramic cores, and a silicone coat. Key Features Resistance range: 0.1 ohms to 300K ohms Power ratings: 1.0 to 14 watts […]
Model P (Stacking Pin Tip Plug; Each End)
Overview The Model P is a stacking pin tip plug that mates with standard 0.08 inch pin jacks, ideal for use as jumper wires on chassis boxes. Key Features Materials: Pin tip body is made of brass, stack-up spring is made of beryllium copper, and insulation is polypropylene molded to the pin tip body and […]
9mm Snap-In Insulated Shaft Potentiometer R-0901G
Overview The R-0901G is a 9mm snap-in insulated shaft potentiometer with a tapered resistance characteristic. It features a rotational angle of 280°, a shaft length of 15mm, and a shaft diameter of 6.8mm. Electrical Characteristics The potentiometer has a rated power of 0.03W, an all-resistance tolerance of ±30%, and a resistance taper characteristic of A.B.C.D.W. […]
Oscillator SMD, programmable auris APQO 5032
Programmable Oscillator APQO 5032 This oscillator is a RoHS compliant, small-sized (5×3.2mm) and low-cost device with a wide operating temperature range (-40°C to +85°C) and voltage range (3.0V to 5.5V). It features ultra-low jitter (
M2300 series H2300 series VCXO 3.3V Full/Half size, Thru-hole, HCMOS/ITTL
Valpey Fisher Corporation offers high-frequency, low-phase noise timing solutions with excellent incremental and best-straight-line linearity and start-up time of less than 5ms. The device is RoHS compliant and suitable for applications such as xDSL customer premise equipment, cable modems, ATM, ISDN, and more. Electrical Specifications The device operates at a frequency range of 150 MHz […]