4000/3000 Series T1 Panel LED
Product Overview The 4000/3000 Series T1 Panel LED is a single-piece construction LED assembly available in various colors and lens styles. It features a front-mounting ribbed body that “snaps into” a panel, eliminating the need for mounting hardware. The LED is available with an internal resistor for AC applications and offers a wide selection of […]
9mm Snap-In Insulated Shaft Potentiometer
Overview This datasheet describes the R-0901G, a 9mm snap-in insulated shaft potentiometer with a taper resistance valve. Key Features The potentiometer has a full CCW rotation shaft with 40 teeth and a maximum rotational angle of 280°. It has a power rating of 0.03W and an operating voltage of up to 250V AC/DC. The device […]
Tyco Electronics SOLDERSLEEVE SHIELD TERMINATOR
Product Overview The SOLDERSLEEVE SHIELD TERMINATOR is designed to provide an environment-protected shield termination on cables, rated for 125°C minimum, with tin or silver plated copper shields. Materials The product consists of a heat-shrinkable insulation sleeve, a solder preform with flux, and meltable rings made of thermally stabilized thermoplastic. Application The product should be installed […]
Ultra Miniature Transformers: Y Series
The Ultra Miniature Transformers: Y Series is a product line from PICO Electronics that features extremely small transformers with a variety of specifications. The transformers have a maximum diameter of 0.35 inches and a height of 0.46 inches, making them ideal for miniaturized telephone coupling applications. They are approved for use in military applications (Mil-PRF-27) […]
Connectorized Terminal Blocks
Overview The connectorized terminal blocks are prewired to 3, 4, 5, or 6 50-pin connectors with horizontal or vertical wiring patterns. They are mountable on standard distribution frames with 5″ (12.7 cm) centers (AE frames) and 1375″ x 7.5″ (3.49 x 19.05 cm) centers (WECO frames). Mounting Options Adjustable mounting brackets are available for distribution […]
Oscillator THT_clock-type auis AQO 08
Overview The auis AQO 08 is a clock-type oscillator in a standard DIL 8 package, offering a low cost to performance ratio. Key Features: Frequency range: 1MHz to 160MHz, with options for tristate or power down. Frequency stability: ±25ppm, ±50ppm, or ±100ppm. Operating temperature range: -40°C to 85°C, with storage temperature range of -40°C to […]
CSM_Z_DS_E_4_4: General-purpose Basic Switch
This datasheet presents the CSM_Z_DS_E_4_4 general-purpose basic switch series, which boasts high precision and a wide variety of contact forms. The series offers a large switching capacity of 15 A with high repeat accuracy and a range of standard models for micro loads. The basic switch models come in various configurations, including general-purpose, drip-proof, and […]
Series 181 Thru 183 90 Pin Staked Flex Jumpers
The Series 181 Thru 183 90 Pin Staked Flex Jumpers combine thin, flexible, solid Copper conductors embedded between layers of tough, flexible, flame-retardant insulation. The cable conductors are solid Copper with a cross-sectional area equivalent to that of 26 gauge AWG. The female housing is black UL 94V-0 Glass-filled Stanyl 4/6 Nylon, and the female […]
Z-152 Series Male Connector
Overview The Z-152 series is a range of male connectors available in various pin counts, including 2, 4, 6, 8, 10, 12, 14, 16, 18, and 20 pins. The connectors have a recommended PCB layout and a thickness of 6 mm. Key Features Contact plating is gold with a minimum thickness of 0.07 micrometers. The […]
Ultra Miniature Transformers: Y Series
Features Extreme resistance to thermal shock, ultra miniature size, approved QPL Source (Mil-PRF-27), magnetic shields available, electrostatic shielding can be added, variation of standard designs available, primary and secondary windings can be used either as input or output. Specifications The datasheet provides detailed specifications for various transformers in the Y series, including part numbers, primary […]