G-NSDMG-025 ACTIVE: NS-3O/DMG2-I ROHS
Overview This datasheet describes the G-NSDMG-025, a fluid tilt sensor and inclinometer device with a horizontal mounting and dual-axis measurement capability. Key Features Operating temperature range: -40°C to 85°C Measurement range: up to +/- 30° Accuracy: up to +/- 0.01° Resolution: up to +/- 0.001° Interface and Electrical Characteristics Analog and digital interface options Voltage […]
RHVTRC 7 HIGH ACCURACY SURFACE MOUNT CRYSTALS
Overview This datasheet describes a high accuracy surface mount crystal series, featuring tight tolerance and stability over temperature, with a wide frequency range. Key Features Frequency range: 1.00 MHz to 360.00 MHz Frequency tolerance: +5 PPM to +25 PPM Operating temperature range: -55°C to +125°C Load capacitance: 10 pF to 50 pF (or series) Three […]
155 Mbps Bi-directional Receptacle Single Fiber Transceiver
This datasheet describes a bi-directional single fiber transceiver that operates at 155 Mbps. It features a diplexer, single mode, single fiber, and 1×9 SCIFCIST receptacle connector. Key Features SONET OC-3 SDH STM-1 compliant Single +5V/+3.3V power supply PECL/LVPECL differential inputs and output TTL/LVTTL differential inputs and output Wave solderable and aqueous washable LED multisourced 1×9 […]
DRADRS Series T1 Right Angle LED Bar datasheet
Overview The DRADRS Series T1 Right Angle LED Bar is a customizable LED bar designed to save PC board space with its bilevel design. It offers variable LED spacing, custom color sequences, and a shrouded version for backlighting. Features The LED bar is available with a variety of LEDs, including 3mm PC Board Mount LEDs, […]
M2300 series H2300 series VCXO 3.3V Full/Half size, Thru-hole, HCMOS/TTTL
The M2300 series and H2300 series are Voltage-Controlled Crystal Oscillators (VCXOs) designed for high-frequency, low-phase-noise timing solutions. Features These VCXOs offer excellent incremental and best-straight-line linearity, with a start-up time of less than 5ms. They are RoHS 5/6 compliant and designed for applications such as xDSL customer premise equipment, cable modems, ATM/SONET/SDH. Electrical Specifications The […]
RFVTSON SENDER-U GEN TDF SCR PT TON PESLHEE L
Single Wire Sealing System This datasheet describes a single wire sealing system with various contact options, including FLR and FLK connections. Key Features The system is usable with TAB 0.8mm and TAB 0.6mm thickness, and offers a range of contact types, including Type A, Type B1, Type C1, and Type C2. The contacts are made […]
Series 181 Thru 183 90 Pin Staked Flex Jumpers
Aries 90° Pin Staked Flex Jumpers combine thin, flexible solid Copper conductors embedded between layers of tough, flexible, flame-retardant insulation. They have a standard cable insulation that is white UL VW-1, Style 2643 flame retardant Polyester (Mylar) adhesive, with a high-temperature flame retardant cable insulation option of Polyimide (Kapton) insulation with acrylic adhesive. The female […]
9mm Snap-In Insulated Shaft Potentiometer R-0901G
This potentiometer features a 9mm insulated shaft and is available in various resistance values (15kΩ, 25kΩ, 30kΩ, 35kΩ) and taper types (A, B, C, D, W). The device has a rated power of 0.03W, and its resistance tolerance is ±30%. The operating voltage is 250V AC/DC, and the insulation resistance is 100MΩ min. Electrical Characteristics […]
Series 112, 113, & 114 Deci-Center” TM Jumpers
The datasheet describes a series of Deci-Center TM jumpers, including Series 112, 113, 114, 112X, 113X, and 114X. These jumpers have specific dimensions, tolerances, and configurations. Cable Details The cable details include the wire number, series pin number, and dimensions such as “W”, “Y”, and “Z” measurements. Ordering Information To order, specify the jumper series, […]
RELEVANT SPECIFICATION DETAILS FOR TROMPETER BJASBACLFP FL8/PP/EXB CONNECTORS
Overview This datasheet provides specifications and details for the TROMPETER BJASBACLFP FL8/PP/EXB connectors. Key Features The connectors have a recommended panel cutout and come with a center contact, intermediate contact, and socket intermediate contact. The finish is TFS-IU (50-hour salt spray, nickel). Dimension and Materials All dimensions are in inches. The datasheet includes drawings and […]