TeraSPEED@ Single Jacket/Single Armor; Gel-Free; Outdoor Stranded Loose Tube Cable
This datasheet describes a single-jacket, single-armor outdoor stranded loose tube cable designed for outdoor use. The cable features corrugated steel tape armoring for additional crush and rodent protection. Key Features: 48 fibers, including 36 G.652.D and 6.657.A1 (TeraSPEED@) and 12 OM4 (LazrSPEED@) fibers, with a black UV-stabilized jacket. Physical Specifications: The cable has a minimum […]
155 Mbps Bi-directional Receptacle Single Fiber Transceiver B-13/15-15S(C)-T(3)-Sxx3(4)
Overview This datasheet describes a 155 Mbps bi-directional receptacle single fiber transceiver, compliant with SONET OC-3 and SDH STM-1 standards. Key Features Diplexer single mode single fiber 1×9 SC receptacle connector Wavelength: Tx 1310 nm, Rx 1530 nm Single +5V/+3.3V power supply PECL/LVPECL differential inputs and output Wave solderable and aqueous washable LED multisourced 1×9 […]
ULTRA-SMALL PACKAGE HIGH-PRECISION VOLTAGE DETECTOR S-1000 Series
Overview The S-1000 series is a family of high-precision voltage detectors featuring ultra-low current consumption and high accuracy. Key Features These voltage detectors offer: Ultra-low current consumption of 350 nA (typ.) High-precision detection voltage with an accuracy of ±1.0% Operating voltage range of 0.95 to 5.5 V Hysteresis characteristics and two output forms (Nch open-drain […]
LazrSPEED@ Plenum Distribution Cable; 2 fiber single-unit
Product Overview This datasheet presents the specifications and features of the CommScope LazrSPEED@ Plenum Distribution Cable, a 2-fiber single-unit indoor cable designed for high-speed data transmission. Mechanical Specifications The cable has a minimum bend radius of 56 mm (loaded) and 38 mm (unloaded), and can withstand tensile loads of up to 200 N (long-term) and […]
8845 Series Patch Cords Standard Size Patch Cord Cable Assembly
The 8845 Series Patch Cords are pre-assembled for quick and easy installation, providing a convenient solution for signal identification and personalization. Key Features: Available in 10 popular colors with matching protective boots. Each assembly contains two KINGS Standard Size 75 Ohm patch plugs (7510-16) terminated to Belden 1694A or equivalent cable in various lengths. Part […]
IRC Semi-Precision Power Wirewound Resistors T Series
General Information The T Series of semi-precision power wirewound resistors offers a range of resistance values from 0.1 ohms to 300K ohms, with power ratings from 1.0 to 14 watts. Key Features Weldable and solderable leads, high thermal conductivity, centerless ground ceramic cores for optimal heat distribution and dissipation. Meets or exceeds all applicable MIL-R-26 […]
I Series Crystal Oscillator
General Information The I Series Crystal Oscillator is a ceramic package with 2 pads, offering a wide frequency range and tight tolerance and stability. Key Features Frequency range: 10.000 MHz to 80.000 MHz Operating temperature range: -40°C to +85°C Storage temperature range: -55°C to +125°C Equivalent series resistance (ESR): see ESR chart Load capacitance: see […]
M2OOO series H2OOO series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/ITTL
Valpey Fisher Corporation High Frequency Low Noise Timing Solutions The M2OOO series H2OOO series VCXO is a high-frequency, low-noise timing solution with a 5.0V full/half size, thru-hole, HCMOS/ITTL package. Features RoHS compliant, frequency range from MHz to 175 MHz, and start-up time less than 1ms. Applications xDSL customer premise equipment, cable modems, ATM/ISONET/ISDH. Electrical Specifications […]
AMP Wire to Board Connectors AntttGro KotRaRot 7 sinra Rcolgryu d xornccok tKicnc ou 2,5 mm MIS AMP-IN (V)
Overview This datasheet presents the features and specifications of the AMP Wire to Board Connectors, a range of connectors that eliminate the need for headers by direct soldering into PCB. Key Features The connectors are available in polarized and non-polarized versions, with three wire ranges (AWG 26-28 and AWG) and two contact types. They feature […]
XOZO2IAB SCR Series Datasheet
Overview The UTC XOZO2IAB SCR series is suitable for applications where the available gate current is limited, such as ground fault circuit interruptors, overvoltage crowbar protection in low power supplies, and capacitive ignition circuits. Features IT(RMS) 1.25A, VDRM/VRMM 600/800/1000V, TO-252 and TO-92 packages, and lead-free and halogen-free options. Ordering Information Various ordering options are available, […]