Commercial Modtek Double Row Box, Right Angle
The datasheet describes aCommercial Modtek Double Row Box, Right Angle product from Cristek Interconnects, Inc. The product features 320 contacts with a straight tail option and meets the electrical performance requirements of MIL-M14. Key Specifications: • Current rating: 5000Ω at 500VDC, 750VAC • Temperature rating: not specified • Insulation resistance: 12MΩ at 500VDC, 5000Ω at […]
SCHRACK Slim PCB Relay SNR Datasheet
General Purpose Relay The SCHRACK Slim PCB Relay SNR is a general purpose relay designed for various applications, including centralized and decentralized heating control, interface technology, and timer, PLC, and IO module applications. Key Features Some of the key features of this relay include: Compact design with a width of only 5 mm Rated coil […]
Standard Low Pass Filters
Product Overview RLC Electronics’ Standard Low Pass Filters offer a range of options for filtering frequencies from 100 MHz to 18 GHz. These filters combine low insertion loss and low VSWR in the Pass Band with sharp skirts and high rejection in the Stop Band. Specifications Available with type N, BNC, TNC, or SMA connectors, […]
Yerru45 S ERJES
Industrial RJ45 Jacks This datasheet describes industrial RJ45 jacks from Yerru45 S ERJES, offering PCB-mounted solutions with or without power contacts. The products cater to Cat 5 specifications and are designed for use with Y-ConFlange-10*, Y-ConFlange-40, and Y-Con plugs. Available Configurations Two series are presented: Y-ConJack-14/-24 and Y-ConJack-15/-25/-25C/-26C. The main differences lie in the power […]
.8″ x 8 Dot Matrix Display Chip
Data Sheet Overview The datasheet provides information on the specifications and characteristics of the .8″ x 8 Dot Matrix Display Chip. The chip is available in various emitter colors and material options, including AIGaAs, GaAs, and GaP. Technical Specifications The chip operates at a voltage of VF (V) at IF-2OmA, with an emitter current of […]
Material Specification Datasheet for JRWG Part Number
Material and Physical Properties The material used for this part is copper with a thickness of 0.075 inches (1.9 mm). The plating is electroplated tin. The insulation is red nylon with a maximum wire insulation diameter (MWID) of 0.367 inches (9.32 mm). Dimensions and Tolerances The dimensions are shown in metric (inches) inches and millimeters. […]
Leitungsstopsel 3- und 4-polig nach DIN 41 700, 41 701 u.a.
The Leitungsstopsel 3- and 4-way plugs, according to DIN 41 700 and 41 701, are used in the civilian and military field of telecommunication, particularly in operator desks, test-and-control equipment, and verification of transmission paths. Technical Data The plugs are designed with screw termination and a thread inside the plug body serves as strain relief […]
4000/3000 Series T1 Panel LED
Key Features The 4000/3000 Series T1 Panel LED offers a wide range of options for customization, including one-piece body and lens construction, various plastic materials, and multiple electrode configurations. Technical Specifications The product meets IP66 standards for protection against moisture and dust, with a sealed design ensuring reliable performance. Dimensions include a mounting hole of […]