Connector, Plug, Electrical, General Purpose Hospital Grade – Grounding
Overview This datasheet specifies the requirements for connectors described as hospital-grade grounding, 2-pole, 3-wire, 15 amperes, 125 volts, and 50/60 hertz. Requirements The connectors shall conform to NEMA WD 6, configuration 5-15P and have the following specifications: Design and configuration: Hospital grade with straight-in wiring using clamp type terminals Dimensions: Shall conform to NEMA WD […]
Wire-to-Wire Splicing SolderSleeve wire splices
Wire-to-Wire Splicing SolderSleeve wire splices Transparent polyvinylidene fluoride or polyolefin sleeve provides encapsulation, inspectability, strain relief, and insulation. Applications In-line wire splices Features and Benefits Prefluxed solder preform provides controlled soldering process One-piece design makes installation easy and lowers the installed cost Meets 75,000 ft (22,000-m) altitude immersion requirement Thermochromic temperature indicator in the NAS […]
Extracted datasheet title: Series 181 Thru 183 90 Pin Staked Flex Jumpers
Key Features Aries 90-pin staked flex jumpers combine thin, flexible, and solid copper conductors with flame-retardant insulation. General Specifications The cable conductors are solid copper with a cross-sectional area equivalent to 26 AWG, and the female housing is made of black UL 94V-0 glass-filled Stanyl 4/6 Nylon. Dimensions and Tolerances All dimensions are in inches […]
9mm Snap-In Insulated Shaft Potentiometer Datasheet
Electrical Characteristics The electrical characteristics of this potentiometer include: Resistance: 250KΩ, with a tolerance of ±30% and a resistance taper of A: 50%, B: 50%, C: 50%, D: 50%, W: 50% Rated Power: 0.03W Mechanical Characteristics The mechanical characteristics of this potentiometer include: Total Rotational Angle: 280° ± 59 Rotation Stopper Strength: 3kgf.cm max / […]
Design Guide for Fasteners
General Information The datasheet provides a design guide for fasteners, including specifications and tolerances for various parts. Dimensions and Tolerances The sheet starts by listing dimensions and tolerances for different parts, including the following: Several numbers and measurements, including diameters, lengths, and travel distances, with corresponding tolerances. References to other parts, including a “REF” label […]
1300 SERIES RECTANGULAR CONNECTORS
Data Sheet Overview The datasheet provides information on the 1300 series rectangular connectors developed by HIROSE. These connectors are designed to meet stringent demands for high-performance and small size equipment manufacturing. Electrical and Environmental Characteristics The connectors have a contact resistance of 5mΩ max, current rating of 5A, and voltage rating of AC4OOV to 1OOOMQ […]