Triad Power Transformer PC Mount: Dual Primary MAGN6T | 0 9
Key Specifications The Triad Power Transformer PC Mount: Dual Primary MAGN6T | 0 9 has the following electrical specifications: Maximum Power: 24.0 VA Primary: Series 230V@50/60 Hz, Parallel 115V@50/60Hz Secondary: Series 10.0V CT @ 2.40 Amps, Parallel 5.0v CT 4.80 Amps Construction and Features This transformer is wound on a single channel nylon bobbin and […]
Ultra Small Surface Mount Coaxial Connectors – U.FL Series
Introduction The U.FL series of ultra small surface mount coaxial connectors offers high frequency performance and small mounting area, making them ideal for miniaturized electronic devices. Features and Specifications The U.FL series connectors have a nominal mated height of 1.9 or 2.4mm, small mounting area, and are light weight with a receptacle weight of 15.7mg. […]
9mm Snap-In Insulated Shaft Potentiometer 9mm
Electrical Characteristics The potentiometer has an all-resistance of 250KΩ with a tolerance of ±2%. The resistance taper is characterized by A, B, C, and D types, with a rated power of 0.03W. Mechanical Characteristics The potentiometer has a total rotational angle of 280° and a rotation stopper strength of up to 3 kgf.cm. It also […]
AXICOM DZn Relay Datasheet
Product Overview The AXICOM DZn Relay, part number V23105, is a 2-pole telecom relay designed for use in various applications including communications equipment, office equipment, measurement and control equipment, entertainment electronics, and medical equipment. It has a non-polarized, Through Hole Type (THT) design and is manufactured by Tyco Electronics AXICOM. Key Features The relay has […]
Rosenberger A-XX-5-N A-XX-5-N-01 Technical Data Sheet
Main Features Key Characteristics: Excellent flatness attenuation value, high capacity in anti-pulse and anti-burnout, and high reliability. Electrical Data The attenuation value and accuracy across different frequencies are as follows: Frequency Part Number Attenuation Value (dB) & Accuracy DC-3GHz A-XX-5-N +0.4, +0.5, +0.5, +0.6 DC-4GHz A-XX-5-N-01 +0.4, +0.5, +0.5, +0.7 Environmental Data The product operates […]
Housing to Housing Adapters
Housing-to-Housing Adapters Overview These adapters are designed for rotational and non-rotational connections between two housings. They feature: • O-rings and Monel mesh gasket for sealing and insulation • 36 internal locking teeth for secure connections • Rotational or non-rotational configurations for adaptability • Various thread sizes and pin diameters for compatibility with different housing types […]
Extracted datasheet title: SERIES Y RELAY NONLATCH 4 PDT, LOW LEVEL TO 5 AMP ENGINEERING DATA SHEET
Overview This datasheet presents the engineering data sheet for the SERIES Y RElay Nonlatch 4 PDT, Low Level to 5 Amp. The relay is qualified to PDT MIL-PRF-83536 and features a polarized pin, Y-DZA AMP, and 4 PDT 28 VDC coil voltage. Technical Characteristics The contacts are rated at low level, 28 Vdc and 115/200 […]
LazrSPEED Light Duty Single Jacket AII-Dielectric Gel-Free Outdoor Stranded Loose Tube Cable
Overview This datasheet provides specifications for the LazrSPEED Light Duty Single Jacket AII-Dielectric Gel-Free Outdoor Stranded Loose Tube Cable, designed for use in outdoor environments. The cable features a black jacket, stranded loose tube construction, and contains 250-micron fibers. It has a gel-free buffer tube and a dielectric strength member. Environmental Specifications The cable is […]
Oscillator SMD, Clock-Type: auris AQO 3225
Oscillator Overview The auris AQO 3225 is a clock-type oscillator designed for small size and low cost. It’s suitable for laptop and handheld PDA applications. Specifications The oscillator features a frequency range of 1.OMHz to S0MHz, with a maximum frequency stability of 40% at an operating temperature range of -40°C to +85°C. The AQO 3225 […]
1300 SERIES RECTANGULAR CONNECTORS
The 1300 SERIES RECTANGULAR CONNECTORS datasheet provides information on a collection of small, rectangular, multi-contact connectors developed by HIROSE. The connectors are designed to meet the stringent demands of high-performance and small size equipment manufacturing. The connectors are available with various termination methods, including soldering, crimping, and wire wrapping. They have a rugged push-button lock […]