LED-Holder LDR (for Smm T1-3/4 LED) with built-in resistor

led-holder-ldr-for-smm-t1-34-led-with-built-in-resistor.pdf

Overview This datasheet describes LED holders with built-in resistors, suitable for Smm T1-3/4 LEDs. Key Features Voltage range: 5-7V, 12-16V, and 24-30V (DC) Available LED colors: red, green, and yellow Securing clip necessary for panel mounting Technical Data Includes mechanical data, solderability, soldering heat resistance, ambient temperature, and storage temperature Materials: Thermoplast socket Manual: > […]

FST 5×20 Pigtail

fst-5x20-pigtail.pdf

The FST 5×20 Pigtail is a miniature fuse with a pigtail design, suitable for primary protection on PCBs. It has a rated voltage of 250 VAC and a breaking capacity of 35 A to 200 A. Key Features: Time-Lag T characteristic, IEC 60127-2 approved, and suitable for pulse-shaped continuous currents. Technical Data: Rated current: 0.05 […]

FST 6.3×32 (UL) Non-Resettable Fuses

fst-63x32-ul-non-resettable-fuses.pdf

General Information The FST 6.3×32 (UL) is a non-resettable fuse that meets UL 248-14 and CSA C22.2 no. 248.14 standards. Technical Data Rated voltage: 25/250 VAC, rated current: 0.63-15 A, breaking capacity: 35 A – 10 kA. Mounting: Fuseholder clip, admissible ambient air temp: -40°C to 85°C, climatic category: 40/085/21 acc. to IEC 60068. Dimensions […]

X9279 Single Supply Low Power 256-Tap Wire Bus

x9279-single-supply-low-power-256-tap-wire-bus.pdf

The X9279 is a single digitally controlled potentiometer (XDCP) integrated circuit that features a 256-tap resistor array with a 2-Wire serial interface. Key Features: 256 resistor taps, 2-Wire serial interface, 16 non-volatile data registers, power-on recall, and low power CMOS operation. Applications: The X9279 can be used in a variety of applications, including control, parameter […]

SCR & TRIAC

scr-triac.pdf

Overview This datasheet provides information on a range of SCR (Silicon-Controlled Rectifier) and TRIAC (Triode for Alternating Current) devices from SGS-Thomson Microelectronics. Key Features The devices are available in various packages, including SOT23, SOT223, DPAK, and TO220AB, with maximum junction temperatures ranging from 110°C to 125°C. The datasheet provides detailed specifications for each device, including […]

NPOXERXZR_YEV ZON Ceramic Chip Capacitors

npoxerxzryev-zon-ceramic-chip-capacitors.pdf

Overview KOA Speer Electronics’ NPOXERXZR_YEV ZON ceramic chip capacitors feature high Q factor, low TC, and are available in high capacitance values (up to 100 pF). Key Features EU RoHS compliant, lead-free terminations, and available in various case sizes (0402, 0603, 0805, 1206, 1210). Dielectric materials include NPO, XSR, X7R, and YSV, with capacitance tolerance […]

ATC 700 A Series NPO Porcelain and Ceramic Multilayer Capacitors

atc-700-a-series-npo-porcelain-and-ceramic-multilayer-capacitors.pdf

The ATC 700 A Series offers high-performance NPO porcelain and ceramic multilayer capacitors with a capacitance range of 0.1 pF to 1000 pF. Key Features: Low ESR and low noise Zero TCC and high self-resonance Rugged construction with hermetic package Extended WVDC up to 250 VDC Quality factor (Q) greater than 10,000 (0.1 pF to […]

7011X1/5 LEDs Datasheet

7011x15-leds-datasheet.pdf

LED Characteristics The 7011X1/5 LEDs are industry-standard size LEDs with a dimensions of 3.0×2.5×1.1 mm. They are available in RED and GREEN colors with a clear, non-diffused epoxy. The LEDs have a peak wavelength of 660 nm (RED) and 560 nm (GREEN) with a typical forward voltage of 1.7V (RED) and 2.1V (GREEN). Electrical Characteristics […]

Fuses https //wwwschurter com /PGO1_2

fuses-https-wwwschurter-com-pgo12.pdf

Miniature Fuse, 4.7 x 16 mm; 125 VAC This fuse is designed for use in industrial environments and has approvals from independent testing bodies according to national and international standards. Technical Data: Rated Voltage: 125 VAC Rated Current: 0.063 – 10 A Breaking Capacity: 35 A Characteristic: Quick-Acting F Mounting: Fuseholder Clip Admissible Ambient Air […]

Mini Spring” Air Core Inductors

mini-spring-air-core-inductors.pdf

These surface mount air core “spring” inductors offer high Q over a wide frequency range, ensuring mechanical stability and tight tolerance. They are jacketed with a high-temperature material and have a flat top, making them suitable for automatic placement and reflow or vapor phase processing. Key Features: Solder-coated leads for reliable soldering, available in standard […]