Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) COG Dielectric, 10 250 VDC (Commercial Grade)
Overview KEMET’s COG dielectric features a 125°C maximum operating temperature and is considered “stable”. It is suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. Benefits The COG dielectric exhibits no change in capacitance with respect to time and voltage, and boasts a negligible change in capacitance with […]
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial “L”, SnPb Termination, XZR Dielectric, 6.3 250 VDC (Commercial Grade)
KEMET’s Commercial “L” surface mount capacitors feature tin and lead termination in XZR dielectric, designed for critical applications requiring tin and lead end metallization. These capacitors offer a temperature stable dielectric with a maximum operating temperature of 125°C, making them suitable for bypass and decoupling applications or frequency discriminating circuits. Key Features: -55°C to +125°C […]
10 Amps/Series 3300
Overview The Series 3300 connectors offer a range of features, including pre-grounding for enhanced safety, and are available in various styles for chassis and cable mounting. Key Features These connectors are U.L. recognized and CSA certified, with individual contacts rated at 10 amps and 750 volts rms. They are suitable for a wide range of […]
SIDACtor Protection Thyristors Baseband Protection (Voice-DSI)
Overview The SIDACtor Series TO-92 is designed to protect baseband equipment from damaging overvoltage transients, enabling compliance with global regulatory standards. Key Features Low voltage overshoot, low on-state voltage, and low capacitance. Fails short circuit when surged in excess of ratings. Agency Approvals Meets global standards including TIA-968-A, GR 1089, IEC 61000-4-5, ITU K.20/21, and […]
P0648 Series TEC H N/TR 0 SMT Power Inductors
Overview The P0648 Series TEC H N/TR 0 SMT Power Inductors are unshielded drum core inductors with a maximum height of 5.0mm and a footprint of 13.1mm x 13.1mm. Key Features Maximum current rating: up to 12.2A Inductance range: 1pH to 1030pH Operating temperature: -40°C to +130°C Electrical Specifications Inductance, saturation current, heating current, and […]
B270 B210O 2.0A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER
This datasheet describes a high voltage Schottky barrier rectifier with a peak repetitive reverse voltage of 70-100V and an average rectified output current of 2.0A. Key Features: Low power loss and high efficiency Surge overload rating to 50A peak High temperature soldering: 260°C/10 seconds at terminal Lead-free finish; RoHS compliant Halogen and antimony-free Applications: Low […]
VH CONNECTOR 3.96 mm pitch / Disconnectable Crimp style connectors
This datasheet describes the VH CONNECTOR, a 3.96 mm pitch disconnectable crimp style connector for printed circuit boards. Key Features: Current rating: 10 A AC/DC (AWG #16), Voltage rating: 250 V AC/DC, Temperature range: -25°C to +85°C. Applications: Suitable for a wide variety of signal, power supply, and output circuits in consumer electronic products. Standards: […]
Emboss Tape Radial Tape JST Crimp XH CONNECTOR 2.5mm Disconnectable Crimp style connectors (098 pitch)
Features The XH connector features a folded beam contact with high contact pressure and an over-stress stop feature, ensuring dependable continuity in low voltage and low current circuits. The connector has a box-shaped shrouded header that prevents misinsertion and pries during insertion and removal, and a serrated, oversized square post that prevents flux from entering […]
RF Wirewound Chip Inductors
Overview These high-frequency, high-Q chip inductors feature a monolithic body made of low-loss ceramic wound with wire to achieve optimal high-frequency performance. Applications These inductors are suitable for various high-volume RF applications, including CELLPCS modules, broadband components, RF transceivers, cable modems, Bluetooth, wireless LAN, RFID, cordless phones, and computer peripherals. Product Range Summary The product […]
RF Wirewound Chip Inductors
Overview These high frequency, high-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. Key Features Compact in size, provided on tape and reel packaging, ideal for high volume RF applications. Nickel barrier with a top plating of gold for ceramic core types and […]