LFM (with Smm T1-3/4 LED) IP 40 Models
Overview The LFM (with Smm T1-3/4 LED) IP 40 Models are a series of LED indicators with built-in or without built-in resistors, available in various colors and body finishes. Key Features These indicators have a maximum current input of 25mA and are suitable for front panel mounting with solder terminals. They have a degree of […]
MXT 250 Subminiature Fuse
Overview The MXT 250 is a subminiature fuse designed for primary protection on PCB power supplies and switching mode power supplies for TVs and DVDs. Key Features Rated voltage: 250 VAC Rated current: 100 A Breaking capacity: 100 A Time-lag T characteristic Directly solderable on printed circuit boards Approvals and Compliances Meets IEC 60127-3, UL […]
X9269 Dual Digitally-Controlled (XDCP) Potentiometers
Overview The X9269 is a dual digitally-controlled potentiometer (XDCP) integrated circuit that provides two separate potentiometers with 256 resistor taps each. Key Features 2-Wire serial interface for write, read, and transfer operations Single supply device with low power consumption Nonvolatile storage of multiple wiper positions with power-on recall Low wiper resistance of 100Ω typical at […]
Quad Digitally Controlled Potentiometers (XDCP)
Overview The X9250 is a quad digitally controlled potentiometer (XDCP) integrated circuit that provides four potentiometers in one package. Key Features 256 resistor taps, 0.4% resolution, SPI serial interface, nonvolatile storage of wiper position, and low standby current. Applications Control parameter adjustments, signal processing, and various applications requiring digitally controlled potentiometers. Interface and Control SPI […]
ASC Metallized Polyester DC Capacitors Tape Wrap and Epoxy Fill Case
This datasheet describes the specifications and characteristics of ASC metallized polyester DC capacitors with tape wrap and epoxy fill cases. Physical Characteristics The capacitors have a non-inductive wound metallized polyester construction, flame retardant tape wrap case, and epoxy fill. The lead material is axial solder coated or tinned solid wire, with dimensions specified in the […]
U6264B Standard 8K x 8 SRAM
The U6264B is a 8192 x 8 bit static CMOS RAM with 70 ns access times, common data inputs and outputs, and three-state outputs. It operates on a 5 V power supply voltage and has a standby current of 2 LA at Ta < 70 *C. Data retention current is < 1 HA at Ta […]
AA723 PRECISION VOLTAGE REGULATORS
The AA723 is a precision integrated-circuit voltage regulator featuring high ripple rejection, excellent input and load regulation, and low standby current. Key Features: 150-mA load current without external power transistor, adjustable current-limiting capability, and input voltages up to 40 V. Output is adjustable from 2 V to 37 V, making it a direct replacement for […]
UAZ8L Series Positive-Voltage Linear Regulators
Overview The UAZ8L series is a family of fixed-voltage linear regulators designed for a wide range of applications, including motor drives, appliances, building automation, flow transmitters, and factory automation and control. Key Features These regulators offer a high level of performance and reliability, with features such as: Input voltage range: 4.75 V to 35 V […]
TT Electronics SIL Resistor Network L Series
The SIL Resistor Network L Series from TT Electronics is a range of thick film low profile SIP conformal coated resistor networks that are RoHS compliant and Pb-free. Electrical Characteristics The series offers a standard resistance range of 22R to 1M with tolerances of 1%, 2%, and 5%. The operating temperature range is -55°C to […]
L6207 DMOS Dual Full Bridge Driver with PWM Current Controller
The L6207 is a DMOS dual full bridge driver designed for motor control applications, featuring two independent constant off-time PWM current controllers. It operates with a supply voltage from 8 to 52 V, has a 5.6 A output peak current, and a maximum operating frequency of 100 kHz. Key Features: Non-dissipative overcurrent protection, thermal shutdown, […]