BULKHEAD JACKS
Overview This datasheet presents straight bulkhead jacks, available in clamp and crimp types, designed for flexible cables. Key Features Clamp type jacks have a maximum panel thickness of 16mm, with various cable group dimensions and part numbers. Crimp type jacks are designed for flexible cables, with different maximum panel thicknesses and cable group dimensions. Part […]
R141.805.000 Series BNC Male Protective Cap with Cord
Overview The R141.805.000 Series BNC Male Protective Cap with Cord is a component with a brass body, black-chromium plated over nickel, and silicone rubber insulator. Electrical Characteristics The component has a 50 ohm impedance, operates at a frequency range of 0-18.5 GHz, and has a voltage rating of 500 Veff. Environmental Characteristics The component operates […]
TECHNICAL DATA STRA Ight Jack RECEPTACLE SMT EDGECARD TYPE
Overview This datasheet describes the technical specifications and characteristics of a Straight Jack Receptacle SMT Edgecard Type connector. Key Features Nominal impedance: 50 ohms, frequency range: 0-48 GHz, temperature rating: -65/+105°C, and voltage rating: 500 Veff. Materials and Finish Body: Brass, Outer Contact: Beryllium Copper, Insulator: PTFE, Gasket: Others, Finish: Gold 0.2 over Nickel, Gold […]
Pulse Unshielded Drum Core PO25ONL Series SMT Power Inductors
The PO25ONL series are SMT power inductors with a pulse unshielded drum core design. They have a maximum height of 7.37mm and a footprint of 18.62mm x 15.14mm. The series offers a wide range of inductance values from 1μH to 103μH, with current ratings up to 8.6A. The operating temperature range is -40°C to +130°C. […]
SMT POWER INDUCTORS Shielded Drum Core Series
Overview The P1I68NLI/P1I69NL series of SMT power inductors features a shielded drum core design with a maximum height of 4.5mm and a footprint of 12.2mm x 12.2mm. Key Features Current rating up to 14A, inductance range of 0.324μH to 750μH, and operating temperature range of -40°C to +130°C. RoHS compliant and available in tape and […]
SMT POWER INDUCTORS Pulse Shielded Drum Core P116ZNL Series
Overview The P116ZNL series of SMT power inductors features a shielded drum core design with a maximum height of 4.8mm and a footprint of 7.5mm x 7.5mm. These inductors have a maximum current rating of up to 3.5A and an inductance range of 1.8uH to 750pH. Key Features Operating temperature range: -40°C to +130°C RoHS […]
E Series Sealed Miniature Toggle Switches
The E Series Sealed Miniature Toggle Switches are designed for various applications, including telecommunications, instrumentation, and medical equipment. Key Features These switches are sealed against solder and cleaning process contaminants, with a UL 94V-0 nylon case and bushing. They offer multi-position options, ESD protection, and are RoHS compliant. Specifications The switches have a contact rating […]
BrT39-#istt DIODE Type ECIODS4
Overview The ECIODS4 diode is a diffusion type rectifier diode designed for general use applications. Key Features Repetitive peak reverse voltage: 400V Non-repetitive peak reverse voltage: 600V (50Hz) Average rectified output current: 1.0A (Ta=25°C) Electrical Characteristics Forward current: 1.57A (RMS) Surge forward current: 30A (half sine wave, non-repetitive, no load) Thermal Characteristics Junction temperature range: […]
E Series Sealed Miniature Rocker and Lever Handle Switches
Overview The E Series sealed miniature rocker and lever handle switches are designed for telecommunications, instrumentation, and computer applications. Key Features These switches are sealed against solder and cleaning process contaminants, with ESD resistance and UL 94V-0 and RoHS compliance. Specifications The switches have a contact rating of up to 7.5 A at 125 V […]
IBM043616CBLBC IBM041816CBLBC 16Mb (512K x 36 & 1M x 18) SRAM
The IBM043616CBLBC and IBMO41816CBLBC are 16Mb synchronous pipeline-mode SRAMs with wide I/O and high-performance CMOS technology. Key Features: Registered addresses, controls, and data-ins; double-data-rate and single-data-rate synchronous mode of operation; burst mode of operation; common I/O; asynchronous output enable; pipeline mode of operation; boundary scan using a limited set of JTAG 1149.1 functions; self-timed late […]