E1UFAS-11.2896M Series Quartz Crystal Resonator
This datasheet describes the E1UFAS-11.2896M series quartz crystal resonator, a HC49US short thru-hole smm height metal resistance weld seal device. Electrical Specifications: Nominal frequency: 11.2896MHz, frequency tolerance/stability: ±3ppm at 25°C, ±5ppm over -40°C to +85°C. Maximum load capacitance: 7pF, maximum equivalent series resistance: 70 Ohms, mode of operation: AT-Cut Fundamental. Environmental & Mechanical Specifications: The […]
TYPE MC138 RTOKO Molded Coils E-JFJTJL
Overview The TYPE MC138 RTOKO Molded Coils E-JFJTJL is a series of space-wound coils designed for high-frequency applications, offering a frequency range of 30MHz to 250MHz and inductance range of 0.03uH to 0.24uH. Key Features These coils feature a single space-wound coil with a tap, allowing for higher inductance and unloaded Q, as well as […]
E1SGA18-13.000M TR Series Quartz Crystal Resonator
This datasheet describes the E1SGA18-13.000M TR series quartz crystal resonator, a surface-mount device (SMD) with a 2-pad metal package and a height of 2mm. The resonator has a nominal frequency of 13.000MHz, a frequency tolerance of ±15ppm at 25°C, and a load capacitance of 18pF. It operates in AT-cut fundamental mode and has a maximum […]
UC2577-ADJ Datasheet
Overview The UC2577-ADJ is a simple step-up voltage regulator that requires few external components. It features a wide input voltage range of 3.0V to 40V and an adjustable output voltage. Key Features Output Switch: 3.0A, 65V(max) NPN switch Input Voltage Range: 3.0V to 40V Output Voltage: Up to 60V as a step-up regulator, and even […]
ALUMINUM ELECTROLYTIC CAPACITORS BT series
Overview The BT series of aluminum electrolytic capacitors is designed for high-temperature applications up to +125°C, making them suitable for heavy-duty services in automobile electronics. Key Features Temperature Range: +125°C Rated Voltage Range: 10 – 450V Rated Capacitance Range: 1 – 4700μF Leakage Current: 0.1CV + 40μA (max) at 20°C, 120Hz Endurance: 5000 hours at […]
Microsemi UC184xA/284xA/384xA CURRENT MODE PWM CONTROLLER
Overview The UC184xA family of control ICs provides externally programmable oscillator features to implement off-line frequency and maximum duty cycle. They are designed to operate with low start-up current and minimum external components. Key Features Low start-up current (0.5mA max), trimmed oscillator discharge current, optimized for off-line and DC-to-DC converters, automatic feed-forward compensation, pulse-by-pulse current […]
SOLID TANTALUM ELECTROLYTIC CAPACITORS nichicon LoW ESR F91 Resin-molded Chip For SMD For High Frcq-ency
This datasheet describes the specifications and characteristics of Nichicon’s F91 series of solid tantalum electrolytic capacitors, which are designed for high-frequency applications and are compliant with the RoHS directive. Key Features: Rated voltage: 6.3V to 50V Capacitance: 1μF to 680μF Low ESR (Equivalent Series Resistance) High reliability and endurance Compliant with RoHS directive (2002/95/EC) Applications: […]
FAN1084 4.5A Adjustable/Fixed Low Dropout Linear Regulator
The FAN1084 series are low dropout three-terminal regulators with 4.5A output current capability, ideal for low voltage applications including VTT bus termination, microprocessor applications, and battery-powered circuitry. Key Features: Fast transient response, low dropout voltage, and on-chip thermal limiting for protection against overload and ambient temperature. Applications: Desktop PCs, RISC and embedded processors, GTL, SSTL […]
MINIATURE SMD HCMOS OSCILLATOR F3345/F3355
The F3345/F3355 are miniature surface mount oscillators suitable for applications such as portable computers, telecommunication devices, and instrumentation. These oscillators feature a tri-state enable/disable function, high shock resistance (3000 G), and are available in a hermetically sealed ceramic package. Electrical Characteristics: The oscillators operate at a frequency range of 1.544 MHz to 80.000 MHz, with […]
Varistor Products Industrial High Energy Terminal Varistors HA Series
The HA Series of Metal-Oxide Varistors (MOVs) are designed for industrial high energy applications, providing secondary surge protection in outdoor and service entrance environments, as well as in industrial applications such as motor controls and power supplies. Key Features: Wide operating voltage range (110V to 750V) High energy absorption capability (170J to 1050J) High peak […]