Low Noise Zener Diode Series
This datasheet presents the Low Noise Zener Diode Series, featuring devices with tight tolerances (±1% or ±20%) and high power handling (500 mW). The diodes are available in hermetically sealed axial-leaded glass DO-35 packages and DO-213 MELF style packages. The series includes 43 devices with Zener voltages ranging from 2.4 V to 76 V, with […]
SERIES JA RELAY NONLATCH AC COIL 2 PDT, 10 AMP
Overview The SERIES JA relay is a non-latch AC coil relay with a 2 PDT contact arrangement, rated for 10 amps. It features an all-welded construction, hermetically sealed, and corrosion-resistant metal can. Key Characteristics Qualified to MIL-PRF-83536, with a weight of 0.088lb max and dimensions of 1.01in x 0.51in x 1.12in. Coil voltages include 115 […]
PERFORMANCE SPECIFICATION SHEET SEMICONDUCTOR DEVICES, DIODE, SILICON, VOLTAGE REGULATOR
This specification covers the performance requirements for micro-miniature 1.5 watt silicon, low leakage, voltage regulator diodes with tolerances of 5 percent, 2 percent, and 1 percent. Four levels of product assurance are provided for each encapsulated device type as specified in MIL-PRF-19500. Physical Dimensions Physical dimensions are specified in figures 1 (DO-41), 2 (surface mount), […]
TECHNICAL DATA straIGHT PLuG CRIMP TYPE CABLE 5/50 D
This datasheet describes a straight plug crimp type cable with a frequency range of 0-42.4 GHz and a temperature rating of -65/+165°C. The cable has a nominal impedance of 50 ohms and a maximum RF insertion loss of 0.05 dB. It also has a voltage rating of 335 Veff and a dielectric withstanding voltage of […]
SMA JACKS – STRAIGHT FLANGE JACKS SOLDER TYPE FOR SEMI-RIGID CABLES
Product Overview This datasheet presents SMA jacks for semi-rigid cables and flexible cables, available in solder and crimp types. Straight Flange Jacks Solder Type These jacks are designed for semi-rigid cables, with part numbers R125 252 000, R125 256 000*, R125 251 000, and R125 255 000*. Bulkhead Jacks Crimp Type These jacks are designed […]
SMB Plugs – Straight Plugs Crimp Type and Clamp Type for Flexible Cables
Overview This datasheet presents two types of SMB plugs for flexible cables: Crimp Type and Clamp Type. Crimp Type Features captive center contact, full crimp and reverse crimping/full crimp, and gold or nickel finish. Clamp Type Features conical braid clamp, captive center contact, and gold finish. Suitable for RG180 cable. Both types are available in […]
EC2S Series Crystal Clock Oscillators CMOS/TTL Output +5.0V Supply Voltage Tri-State Output Function High and Low Output Drive Options Pad Ceramic SMD Package RoHS Compliant (Pb-Free)
Overview The EC2S series crystal clock oscillators offer a frequency range of 1.544MHz to 106.250MHz with a +5.0V supply voltage and tri-state output function. Key Features High and low output drive options, pad ceramic SMD package, and RoHS compliant (Pb-Free). Electrical Specifications Operating temperature range: -10°C to +70°C (or -40°C to +85°C), input current: 1OmA […]
Inrush Current Suppressors
Inrush Current Suppressors Overview Inrush current suppressors are NTC (negative temperature coefficient) thermistors designed to limit excessive inrush current in applications such as switching power supplies. These suppressors have high initial resistance, which drops to negligible resistance after the initial surge, preventing damage to other system components. Key Features Available on radial tape and reel […]
E1SAA18-12.00M Quartz Crystal Resonator HC49/UP Short 2 Pad Surface Mount (SMD)
This datasheet describes the E1SAA18-12.00M quartz crystal resonator, a surface mount device (SMD) with a 3.2mm height metal resistance weld seal. Electrical Specifications: Nominal frequency: 12.00MHz, frequency tolerance/stability: ±50ppm at 25°C, ±100ppm over 0°C to +70°C, and aging at 25°C: ±5ppm/year. Maximum load capacitance: 18pF parallel resonant, shunt capacitance: 7pF, and maximum equivalent series resistance: […]
HEADER ASSEMBLY, MOD BREAKAWAY, DOUBLE ROW, 100 X 100CL, VERTICAL, WITH RETENTION FEATURE, .025 SQ.POSTS, HIGH TEMPERATURE
This datasheet describes a header assembly with a double row, 100 x 100CL, vertical configuration, featuring retention and .025 sq. posts. The assembly is designed for high-temperature applications. Key Features: Material: Phosphor bronze with gold in the contact area, matte tin-lead on the solder tail, and nickel plating. Dimensions: The post tips have a position […]