LEADED JUMPER 2 ZERO OHM JUMPER
General Purpose Leaded Jumpers These jumpers are suitable for automatic machine insertion and are size compatible with 1/8, 1/4, and 1/2 watt resistors. Key Features Operating Temperature Range: -55°C to 55°C Rated Ambient Temperature: 70°C Dielectric Strength: 450V AC minimum Insulation Resistance: 10MΩ minimum Available in various types (Z and J) with different dimensions and […]
Z53C80 SMALL COMPUTER SYSTEM INTERFACE (SCSI)
Overview The Z53C80 is a 44-pin PLCC or 48-pin DIP CMOS device that implements the SCSI protocol as defined by the ANSI X3.131-1986 standard. Key Features Supports DMA or programmed I/O data transfers, arbitration, and direct SCSI bus interface with on-board 48mA drivers. Compatible with industry standard 5380 and capable of operating as both target […]
Cannon ZD Connectors
Overview The Cannon ZD Connectors are high-density, crimp cable receptacles available in various shell sizes and arrangements, with 15, 26, 44, or 62 contacts. Key Features Through-hole and screwlock thread options, captive nut thread 4-40, and RoHS compliance. Connectors are supplied without contacts, with reeled contacts available on page 34. Dimensions are shown in mm, […]
YKLOZxx3xOjOg Terminal Block Datasheet
Overview This datasheet describes the YKLOZxx3xOjOg terminal block, a 2P&3P housing with slots in the side walls. Key Features Electrical Ratings: 300 V, 20 A AC, with a withstand voltage of 2000 V/min and insulation resistance of 1000 MΩ or more at DC 500 V. Operating Temperature Range: -40°C to +115°C. Materials: Thermoplastic UL 94 […]
ARRAY CHIP RESISTORS YC/TC SERIES
This datasheet describes the YC (convex, flat) and TC (concave) series chip resistor arrays with lead-free terminations made by a thick film process. Features AEC-Q200 qualified, RoHS compliant, and halogen-free epoxy. Low assembly costs, high component and equipment reliability, and saving of PCB space. Applications Terminal for SDRAM and DDRAM, computer applications, consumer electronic equipment, […]
EMI FILTERS-KYOceRa IAIVNC Solder-In Style High Temp EMI Filters ZZ Series .118 Dia: Circuits Available C & L
The ZZ series of high-temperature EMI filters are designed for use in impedance circuits where large capacitance values are not practical. They provide effective filtering in the microwave frequency spectrum from 100 MHz to 26 GHz. Key Features: High-temperature construction withstands 300°C installation temperatures. Rugged monolithic discoidal capacitor construction with glass hermetic seal on one […]
Surface Mount Aluminum Electrolytic Capacitors NACX Series
Overview The NACX series of surface mount aluminum electrolytic capacitors features a cylindrical V-chip construction with very low impedance at 100kHz. Key Features RoHS compliant, wide temperature range (-55°C to +105°C), and designed for reflow soldering. Characteristics Rated voltage range: 6.3V to 63V, rated capacitance range: 1.0μF to 150μF, and operating temperature range: -55°C to […]
3M Four-Wall Header 3000 Series 100″ x 100″ Latch/Ejector, Straight and Right Angle
Overview The 3M Four-Wall Header 3000 Series is a high-temperature, polarized connector designed for use in military and commercial applications. Key Features The connector features a latch/ejector system, straight and right-angle versions, and optional polarizing posts. It is suitable for “no-lead” soldering operations and has a high-temperature insulator made of glass-filled polyester (PCT). Electrical Characteristics […]
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
Overview The NACEW series of surface mount aluminum electrolytic capacitors are designed for reflow soldering and feature a cylindrical V-chip construction. Key Features Operating Temperature Range: -55°C to +105°C Rated Voltage Range: 6.3V to 100Vdc Rated Capacitance Range: 1.0μF to 12,000μF Low Temperature Stability: Within ±25% of initial measured value Load Life Test: 1,000 to […]
DCT854A, UC2854B, UC3854B – Advanced High-Power Factor Preregulator
Overview The UC2854A/B and UC3854A/B are advanced high-power factor preregulators that provide all necessary functions for active power factor correction. Key Features These devices offer a wide bandwidth, low-offset current amplifier, faster and improved accuracy enable comparator, and UVLO threshold options. They also feature a fixed-frequency oscillator, PWM, voltage amplifier with soft-start, line voltage feedforward, […]