kHz RANGE CRYSTAL UNIT Low PROFILE SMD
Overview This datasheet describes the FC-135, FC-145, and FC-255 kHz range crystal units, which are low-profile SMD devices suitable for small communications devices. Key Features Nominal frequency range: 32 kHz to 100 kHz Thickness: 0.9 mm max Overtone order: Fundamental Applications: Small communications devices Specifications Frequency tolerance (standard): ±20 x 10-6 Load capacitance: 7 pF, […]
FAN7311 LCD Backlight Inverter Drive IC
The FAN7311 is a single-stage power conversion IC designed for series-parallel resonant converters, featuring a pulse width modulation (PWM) controller to develop a supply voltage. Key features include: High-Efficiency Single-Stage Power Conversion Wide Input Voltage Range: 5V to 25.5V Backlight Lamp Ballast and Soft Dimming Typical operating frequency range is between 130kHz and 250kHz, depending […]
RTOKO Molded Coils for Surface Mounting @2#E-JFJTJL TYPE MC 152
The RTOKO Molded Coils for Surface Mounting TYPE MC 152 are low-profile SMT molded coils ideal for use in RF circuits for communication and car radio applications. These coils are available in shield cases and offer a range of inductance values from 13nH to 142nH, with a frequency range of 30MHz to 150MHz. Key Features: […]
e1217X Datasheet
Overview The e1217X is a CMOS integrated circuit designed for analog CMOS IC watches. It features a 32-kHz oscillator, frequency dividers, output pulse formers, and push-pull motor drivers. Key Features Integrated voltage regulator for oscillator stability and low current consumption Integrated capacitors for crystal tuning (selectable via mask option) Low resistance outputs for bipolar stepping […]
ECZGOOTS-25.175M Series Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3Vdc
This datasheet describes the ECZGOOTS-25.175M series of quartz crystal clock oscillators, which are 25.175MHz nominal frequency devices with a tri-state (high impedance) output and a duty cycle of 50% ±10%. The oscillators have a frequency tolerance and stability of ±100ppm maximum, and operate over a temperature range of -10°C to +70°C. Electrical Specifications: The devices […]
COOPER Bussmann 1/4″ x 1-1/4″ Fuses AGC Series, Fast Acting; Glass Tube
The AGC Series fuses are fast-acting, glass tube fuses with nickel-plated brass endcaps. They are UL Listed and meet standard 248-14. Electrical Characteristics The fuses have a maximum opening time of 120 seconds at 200% of the amp rating. They also have a typical DC cold resistance and typical voltage drop. Agency Information The fuses […]
SOLID TANTALUM ELECTROLYTIC CAPACITORS nichicon Low ESR F91 Resin-molded Chip
This datasheet describes the specifications and characteristics of the F91 series of solid tantalum electrolytic capacitors from Nichicon. Key Features: Low ESR (Equivalent Series Resistance) Resin-molded chip design for surface mount applications Compliant with the RoHS directive (2002/95/EC) Performance Characteristics: Temperature range: -55°C to +125°C Capacitance tolerance: ±20% Dissipation factor: ≤150% of initial specified value […]
Sta-Kon Termination Products Ring Terminals
Overview Sta-Kon offers a comprehensive line of ring terminals, including nylon-insulated and vinyl-insulated options, designed to meet military, UL, and CSA specifications. Key Features These terminals feature brazed seam wire barrels, serrated barrels for increased grip on wire, and wire range identification on the tongue of each terminal. They are constructed from electrolytic copper for […]
Metal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) MLA Series
Overview The MLA Series is a family of transient voltage surge suppression devices designed to protect integrated circuits and other components at the circuit board level. These devices are based on Littelfuse’s Multilayer fabrication technology and are suitable for various applications, including power supply, control, and signal lines. Key Features Halogen-free and RoHS compliant, leadless […]
Metal-Oxide Varistors (MOVs) Radial Lead Varistors LA Varistor Series
Overview The LA Varistor Series are radial leaded varistors (MOVs) designed for continuous operation across AC power lines. They require minimal mounting space and are available in four model sizes: 7mm, 10mm, 14mm, and 20mm. Key Features These varistors have a wide operating voltage range (130V to 1000V), high energy absorption capability (up to 360J), […]