Omron PCB Relay G2R

omron-pcb-relay-g2r.pdf

Overview The Omron PCB Relay G2R is a power relay designed for various purposes, conforming to multiple international standards, including VDE, UL, CSA, and SEMKO. Key Features The relay is available in various models, including high-sensitivity and high-capacity types, with features such as double-winding latching, plug-in terminals, and quick-connect terminals. It offers a range of […]

G2R PCB Power Relay

g2r-pcb-power-relay.pdf

The G2R PCB Power Relay is a general-purpose relay with a single-pole 10 A and double-pole 5 A rating. It features a safety-oriented design with a dielectric strength of 5,000 V between the coil and contacts, and surge resistance of 10,000 V. The relay is available in both AC and DC types, and is RoHS […]

General Purpose Relay G7L

general-purpose-relay-g7l.pdf

Overview The General Purpose Relay G7L is designed for high-inrush fluid pump controls, emergency, and chemical industry applications. It features high-capacity, high-withstand voltage, and no contact chattering for momentary voltage drops up to 50% of rated voltage. Key Features UL Class B construction standard, wide-range AC-activated coil, and miniature size for maximum switching capacity. Flame-resistant […]

Surface Mount Aluminum Electrolytic Capacitors NACZF Series

surface-mount-aluminum-electrolytic-capacitors-naczf-series.pdf

Overview The NACZF Series of surface mount aluminum electrolytic capacitors offers high capacitance values (up to 6800uF) and low impedance at 100kHz. They are designed for high vibration applications and have a long life of 5000 hours at +105°C. Key Features Case Sizes: 12.5 x 17mm, 16 x 17mm, 16 x 22mm, 18 x 17mm, […]

xx555 Precision Timers

xx555-precision-timers.pdf

Overview The xx555 is a precision timing circuit capable of producing accurate time delays or oscillation. It can operate in astable or monostable modes, with adjustable duty cycles and TTL-compatible outputs. Key Features Timing: From microseconds to hours Operation: Astable or monostable modes Output: TTL-compatible, can sink or source up to 200 mA Supply: 5 […]

Single Phase Bridges

single-phase-bridges.pdf

Overview This datasheet provides information on single phase bridges from Microsemi, with various part numbers, package types, and ratings. Key Features The bridges have rated currents per leg ranging from 50A to 100A and rated voltages per leg from 200V to 1200V. There are multiple part numbers listed, each with its corresponding package type and […]

50 WATT ZENER DIODES Qualified per MIL-PRF-19500/358

50-watt-zener-diodes-qualified-per-mil-prf-19500358.pdf

These high power Zener diodes provide voltage regulation in a selection over a 3.9V to 200V broad range of voltages. They may be operated up to 50 W with adequate mounting and heat sinking due to their low thermal resistance. Available in JAN, JANTX, and JANTXV military qualifications, these Zeners are also offered in standard […]

SERIES 420/422 MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT

series-420422-magnetic-latching-established-reliability-to-5-relays-dpdt.pdf

Overview The Series 420/422 magnetic-latching relays are designed for high-density PC board mounting, featuring small size and low coil power dissipation. They are suitable for applications where power dissipation must be minimized and can be operated with a short duration pulse. Key Features Relay Type: DPDT basic relay, DPDT relay with internal diode for coil […]

STARJACK TM 1×1 Tab-DOWN RJ45

starjack-tm-1x1-tab-down-rj45.pdf

Overview The STARJACK TM 1×1 Tab-DOWN RJ45 is a high-performance, cost-effective RJ45 connector designed for high-volume consumer applications such as ADSL modems, cable modems, STB, and Video on Demand. Key Features Meets IEEE 802.3 specification with 350pH minimum OCL and 8mA bias current. Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP. […]

MIL-HDBK-103BG: Department of Defense Handbook List of Standard Microcircuit Drawings

mil-hdbk-103bg-department-of-defense-handbook-list-of-standard-microcircuit-drawings.pdf

This handbook provides guidance on the Standard Microcircuit Drawing Program (SMDP) under the DoD Parts Management Program (PMP). It aims to eliminate the need for multiple contractor-prepared drawings for the same device by providing a standardized drawing system. Scope and Purpose The SMDP is implemented by the DoD Parts Management Program, which screens candidate parts […]