L-7113ID T-1 3/4 (5mm) Solid State Lamp
This datasheet describes the L-7113ID, a high-efficiency red light-emitting diode (LED) with a T-1 3/4 diameter package. Key Features: Low power consumption Long life solid-state reliability Available on tape and reel RoHS compliant Applications: Status indicator PCB layout illuminator Signage applications Decorative and entertainment lighting Commercial and residential architectural lighting The datasheet provides detailed information […]
L4SPNM-RC Type N Male RingFlareTM for 5/8 in LDF4.5-50 cable
General Specifications The L4SPNM-RC is a Type N Male RingFlareTM connector for 5/8 in LDF4.5-50 cable, featuring a straight body style and captivated inner contact attachment method. Electrical Specifications The connector has a typical insertion loss of 0.05 dB, average power of 0.6 kW at 900 MHz, and a cable impedance of 50 ohm. Mechanical […]
100″ X 100″ Latch/Ejector Header 3 Wall, Straight & Right Angle, High Temp Option
Overview This datasheet describes a 100″ x 100″ latch/ejector header with a 3-wall design, available in straight and right-angle configurations, and a high-temperature option. Key Features Military-grade with 3M’s 3518 polarizing key and center bump polarization Low profile with optional ejector latches and mounting holes for securing the header to the board Three-wall shroud provides […]
100″ X 100″ Latch/Ejector Header 3 Wall, Straight & Right Angle, High Temp Option
Overview This datasheet describes a 100″ x 100″ latch/ejector header with a 3-wall design, available in straight and right-angle configurations, and a high-temperature option. Key Features Physical: Glass-filled polyester (PBT) or high-temperature PCT insulation, copper alloy contacts, and nickel underplate. Electrical: 1A current rating, >10^9 Ω insulation resistance, and 1000 Vrms withstanding voltage. Environmental: Operating […]
74F244/74F244B Octal buffers (3-State)
The 74F244 and 74F244B are octal buffers designed for driving bus lines and buffer memory address registers. Key features include: Octal bus interface 3-State output buffer with sink current of 64mA and source current of 1SmA Two output enables (OEa and OEb) controlling four outputs each Reduced ground bounce, Icc, and loading in the 74F244B […]
270 Series Terminals
The 270 Series Terminals are high-wattage resistors suitable for rugged applications, featuring all-welded construction and durable lead-free vitreous enamel coating. They are available in various wattage ratings from 12 to 1000 watts, with a temperature coefficient of 1 to 202: +400 ppm/°C and a maximum voltage based on Ohm’s Law. Key Features: Terminals: Solder coated […]
D-SUB TECHNICAL DATA
Overview This datasheet provides technical information for D-SUB connectors, specifically the HTN series. Key Features The connectors have a shell body made of steel with a nickel coating, and contacts made of brass with a gold over nickel plating. The connectors have a voltage rating of 250V RMS, a current rating of 0A, and an […]
Ultra Miniature 400 Hz Transformers
Overview This datasheet presents ultra-miniature 400 Hz transformers designed for aerospace applications, featuring printed circuit thru-hole construction and secondary split winding for half-voltage operation at twice the current. Key Features Manufactured to MIL-PRF-27, Grade 5, Class S, with 90°C ambient temperature rating. Primary voltages of 115V or 26V, with various secondary voltage and current options. […]
A-Series Thin Film Surface Mount Chip Attenuator
The A-Series attenuator features a 99.5% Al2O3 substrate material, ultra-low noise, and excellent high-frequency performance. It has a nickel barrier layer for excellent solderability and mechanical integrity, and polyimide passivation of the attenuator element. The attenuator is available in various sizes, including 0402, 0603, 0805, and 1206, with rated powers ranging from 32mW to 125mW. […]
Flyback Transformers
This datasheet presents a range of flyback transformers designed for use in dc-dc and off-line switching converters. These transformers are stocked for immediate delivery and can be sampled at no cost. Key Features The transformers are organized by input voltage and sorted by output voltage. They operate at a wide range of frequencies and power […]