E1SFAS-11.2896M TR Series Quartz Crystal Resonator
The E1SFAS-11.2896M TR is a series quartz crystal resonator with a nominal frequency of 11.2896MHz and a load capacitance of 7pF. It has a frequency tolerance/stability of ±3ppm at 25°C and ±50ppm over -40°C to +85°C, with an aging rate of ±5ppm/year at 25°C. Electrical Specifications The resonator has a maximum equivalent series resistance of […]
EC26O0TS-80.00M TR Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
This datasheet describes a quartz crystal clock oscillator with a nominal frequency of 80.00MHz and a frequency tolerance of ±100ppm. The device operates on a 3.3Vdc supply voltage, has a maximum operating temperature range of -10°C to +70°C, and is available in a 5.0mm x 7.0mm ceramic surface mount package. Electrical Specifications: The oscillator has […]
RTOKO Molded Coils E-JFJTJL – MC120 Space Wound
The MC120 Space Wound molded coils are designed for low-profile applications with a maximum height of 13mm. They feature a shield case and have terminal locations similar to the 1OEZI1OK series. Key Features: Inductance range: 0.03~0.53H Frequency range: 30~150MHz High Q close wound: 0.04~0.53H Space wound: 0.03~0.21pH Selection Guide: Alternate use of an aluminum core […]
438 Density, 6-32 x 1/4′ BH Screw, Open Bottom, Double Row Barrier Blocks Series 141
Electrical and Mechanical Characteristics The Barrier Blocks Series 141 has a voltage rating of 250 VAC RMS maximum and a current rating of 20 Amps maximum, with a maximum of 5000 watts per terminal. The maximum wire size is #14 AWG, and the recommended tightening torque is 12 lb.-in. Dimensions and Ordering Information The series […]
D-SUBMINIATURE CONNECTORS: K85X Series Vertical PCB Mount and Solder Cup
K85X Series Overview The K85X series is a range of D-subminiature connectors designed for vertical PCB mounting and solder cup applications. Key Features Available in various shell sizes (E, A, B, C) with 9-37 contacts, these connectors feature precision-formed pin contacts and solder cups. Mounting options include blank, through-hole, and threaded boardlocks, with plating options […]
KAZSOOC 8 SMPS Controller
Overview The KAZSOOC is a pulse-width modulation (PWM) controller designed for switching regulators. It features an internal 5V reference voltage circuit, two error amplifiers, a flip-flop, an output control circuit, a dead-time comparator, and an oscillator. Key Features Internal Regulator: Provides a stable 5V reference voltage with ±1% accuracy. Output Control: Supports push-pull or single-ended […]
KA-91-0i Datasheet
General Information The KA-91-0i is a component made from beryllium copper with brass and stainless steel parts, insulated with Teflon. Electrical Characteristics The component has a nominal impedance of 50 Ohms, operating within a frequency range of 2-18 GHz, and a working voltage of 500 VRMS. Physical Characteristics The surface area is approximately 4*1, with […]
SKblbl RLTISIOX RECOD ECO zu10
Product Overview This datasheet describes the SKblbl RLTISIOX RECOD ECO zu10, a component with electrical characteristics and physical dimensions. Materials and Finishes The component features a glass-filled polyester insulator, steel shells with zinc flake and chromate seal, and a black color. Electrical Characteristics The insulator resistance is 6 ohms, with a working voltage of 308V […]
ODIOF Series Little Demon Carbon Composition Molded 5% & 10% Tolerance
Overview Ohmite’s Little Demons are small, reliable carbon composition resistors with exceptional strength and high dielectric strength. Key Features They offer low noise, rapid heat dissipation, and high temperature stability, with a durable coating that resists abrasions and chipping. Available in E24 values, with 5% and 10% tolerance options. Construction Molded phenolic body with solder-coated […]
OP07, OPO7C, OPO7D Precision Operational Amplifiers
Overview The OPO7C and OPO7D (OPO7x) devices are low-noise, chopperless, bipolar-input-transistor amplifiers offering low offset and long-term stability. Key Features No external components required for offset nulling and frequency compensation. Wide input-voltage range: 0 V to +14 V (typ, +15-V supply). Wide supply-voltage range: +3 V to +18 V. Low bias currents and extremely high […]