Si L4992 Triple Output Power Supply Controller
Overview The L4992 is a sophisticated triple output power supply controller designed for notebook computers and battery-powered equipment. It features two high-performance PWM controllers for +3.3V and +5.1V lines, a 12V linear regulator, and dual synchronous rectifiers. Key Features High Efficiency: Achieves 96% efficiency at 3.3V and 93% at 5.1V. Power Management: Includes under/overvoltage output […]
Surface Mount and Through-Hole Multilayer Ceramic Chip Stacked Capacitors KPS MIL Series, SMPS Stacked Capacitors, MIL-PRF-49470, DSCC 87106, 1,000 VDC (Commercial, Military and Space Grades)
KEMET Power Solutions (KPS) MIL Series ceramic capacitors are designed for high reliability switch mode power supply (SMPS) and pulse energy applications. These capacitors are available in commercial, military, and space grades, and are qualified under MIL-PRF-49470 and DSCC 87106. Key Features: Available in unencapsulated and encapsulated styles in both surface mountable and through-hole configurations. […]
Tantalum Through-Hole Capacitors Hermetically Sealed T111 Series Axial MIL-PRF-39003 Non-Polar and T213 (CSR91 Style)
The T111/T213 Series of tantalum through-hole capacitors are designed for use in tuned circuits, low frequency circuits, phasing low voltage AC motors, servo systems, and other applications where reversal of polarity is a primary consideration. These capacitors are hermetically sealed, axial, and non-polar, with capacitance values ranging from 0.0023 pF to 160 pF and voltage […]
Tantalum Through-Hole Capacitors Hermetically Sealed T11O Series Axial MIL-PRF-39003 Polar Type and T212 (CSR13 Style)
KEMET’s T11O Series and T212 (CSR13 Style) are hermetically sealed, axial, polar-type tantalum through-hole capacitors designed for high humidity environments and miniaturized circuitry. Key Features: Available in capacitance values from 0.0047 pF to 330 pF with tolerances of +5%, +10%, and +20% Rated voltages range from 6 VDC to 125 VDC Operating temperature range: -55°C […]
Tantalum Through-Hole Capacitors Hermetically Sealed T11O Series Axial MIL-PRF-39003 Polar Type and T212 (CSR13 Style)
KEMET’s T11O Series and T212 (CSR13 Style) are hermetically sealed, axial, polar-type tantalum through-hole capacitors designed for high humidity environments and miniaturized circuitry. Key Features: Available in capacitance values from 0.0047 pF to 330 pF with tolerances of +5%, +10%, and +20% Rated voltage range: 6 VDC to 125 VDC Operating temperature range: -55°C to […]
3M Four-Wall Condo Header 100″ x 100″ Right Angle 3000 Series
Overview The 3M Four-Wall Condo Header is a high-density packaging solution with stacked pins, suitable for applications requiring high pin counts up to 128. Key Features Physical: Glass-filled polyester (PBT) or high-temperature polyester (PCT) insulation, copper alloy contacts, and optional high-temperature insulator for lead-free soldering. Electrical: 2A current rating, >1×10^10 Ω insulation resistance, and 1000 […]
100″ X .100″ Latch/Ejector Header Wall, Straight & Right Angle, High Temp Option
Overview This datasheet describes a 100″ x .100″ latch/ejector header wall available in straight and right angle configurations, with a high temperature option. Key Features Physical: Glass filled polyester (PBT) insulation, copper alloy contacts, and nickel underplate. Electrical: 1 A current rating, >1×10^9 Ω insulation resistance, and 1000 Vrms withstanding voltage. Environmental: Operating temperature range […]
74F07 Hex inverter/buffer drivers (open-collector)
The 74F07 is a hex inverter/buffer driver with open-collector outputs, capable of driving 64mA at 12V. Key Features: High speed: 12V output termination voltage, 4.5ns propagation delay Low power consumption: Typical supply current of 32mA Open-collector output drive: 64mA high-level output current Package Options: Available in 14-pin plastic small outline package (SOT108-1) and 14-pin plastic […]
Right Angle Thru Hole Header Assembly Product Specification
Overview This datasheet describes the product specification for a right angle thru hole header assembly. Key Features The assembly features 0.76mm gold contacts with plastic PLC and hold-downs, and is available in single row micro mate-n-lock configuration. Dimensions and Materials The assembly has a high-temperature nylon housing with a black finish, and contacts made of […]
HEADER ASSEMBLY, MOD BREAKAWAY, DOUBLE ROW, HIGH TEMPERATURE
This datasheet describes a header assembly with a modular breakaway design, suitable for high-temperature applications. The assembly consists of a double-row header with a specific pinout and dimensions. The header is made of a copper alloy with a matte tin lead-free finish. Key Features: Modular breakaway design Double-row header High-temperature application Copper alloy material Matte […]