MARCOM) DC2964 DOCUMENT CONTROL MASTER CUSTOMER PROCUREMENT SPECIFICATION Z86E21 CMOS Z8 OTP MICROCONTROLLER
General Description The Z86E21 microcontroller (MCU) is a 32-pin device with 8 Kbytes of EPROM and 238 bytes of general-purpose RAM. It features a flexible I/O scheme, efficient register and address space structure, and low power consumption. Key Features The MCU has two on-chip counter/timers, a UART, and a sophisticated interrupt system. It is available […]
SASSSATION 51 0402 Thick Film Chip Resistor
Overview The SASSSATION 51 0402 is a thick film chip resistor with wraparound terminations, offering a resistance range of 10-4MQ with tolerances of 1%, 2%, 5%, and 10%. Key Features Performance Characteristics: TCR of ±100, ±200, and ±300 ppm, maximum power of 50 mW, and maximum voltage of 30 V. Environmental Performance: Meets MIL-PRF-55342 standards […]
10 Amps/Series 3300
Overview The Series 3300 connectors offer a range of features and options for panel and cable mounting, with a focus on safety and ease of use. Key Features Pre-grounding connectors with U.L. recognition and CSA certification for enhanced safety. Available in various styles for chassis and cable mounting, with different types of mounting hardware and […]
SASSSATION 3 0603 Thick Film Chip Resistor
Overview The SASSSATION 3 0603 Thick Film Chip Resistor is a standard grade, wraparound termination resistor with 96% alumina chip performance characteristics. Key Features Resistance range: 10-40MΩ with tolerances of 0.5%, 1%, 2%, 5%, and 10% TCR: +100, +200, +300 ppm Maximum power: 100 mW Maximum voltage: 45 Volts Environmental Performance Meets MIL-PRF-55342 standards for […]
500 mW Metallurgically Bonded Glass Zener Diodes
Overview The 1N4099-1 through 1N4135-1 and 1N4614-1 through 1N4627-1 series are 500 mW, Zener voltage regulators in the axial-leaded, glass DO-35 package. Features These diodes are constructed with an internal metallurgical bond and are mil-qualified up to the JANS level for high reliability applications. They are available in various voltage ranges (1.8 to 100V) with […]
MIL-PRF-19500/406M: Performance Specification Sheet for Rectifier, Semiconductor Device, Silicon, Voltage Regulator
Overview This specification covers the performance requirements for micro-miniature 1.5 watt silicon, low leakage, voltage regulator diodes with tolerances of 5 percent, 2 percent, and 1 percent. Scope The specification includes four levels of product assurance (JAN, JANTX, JANTXV, and JANS) for each encapsulated device type, with maximum ratings and primary electrical characteristics defined. Package […]
SERIES 420/422 MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT
Overview The Series 420/422 magnetic-latching relays are designed for high-density PC board mounting, featuring small size, low coil power dissipation, and high reliability. They are suitable for applications where power dissipation must be minimized and can be operated with a short duration pulse. Key Features These TO-5 relays have low intercontact capacitance and contact circuit […]
SERIES Y RELAY NONLATCH 4 PDT, LOW LEVEL TO 5 AMP
The SERIES Y relay is a non-latch, 4-pole double-throw (PDT) relay designed for low-level applications up to 5 amps. It features a hermetically sealed, corrosion-resistant metal can and is qualified to MIL-PRF-83536. Key Characteristics: Contacts are rated for 28 Vdc and 115/200 Vac, 400 Hz, with a maximum weight of 0.058 lb and dimensions of […]
ARRAY CHIP RESISTORS YC/TC SERIES
Overview This datasheet describes the YC (convex, flat) and TC (concave) series chip resistor arrays with lead-free terminations made by thick film process. Features AEC-Q200 qualified, RoHS compliant, and halogen-free epoxy. These resistors offer efficient pick & place application, low assembly costs, and high component reliability. Applications Terminal for SDRAM and DDRAM, computer applications, consumer […]
ARRAY CHIP RESISTORS YC/TC SERIES
Overview This datasheet describes the YC (convex, flat) and TC (concave) series chip resistor arrays with lead-free terminations made by a thick film process. Features AEC-Q200 qualified, RoHS compliant, and halogen-free epoxy. These resistors are designed for efficient pick and place application, low assembly costs, and high component reliability. Applications Terminal for SDRAM and DDRAM, […]