X9408 Low Noise, Low Power, 2-Wire Bus Quad Digitally Controlled Potentiometers (XDCP)
Overview The X9408 is a quad digitally controlled potentiometer (XDCP) integrated circuit that features four potentiometers in one package, each with 64 resistor taps and a 2-wire serial interface. Key Features Low noise, low power operation with standby current < 1μA max (total package) Vcc = 2.7V to 5.5V operation, V+ = 2.7V to 5.5V, […]
X5328, X5329 CPU Supervisor with 32Kbit SPI EEPROM
Overview The X5328 and X5329 are CPU supervisors that combine power-on reset control, supply voltage supervision, and block lock protect serial EEPROM memory in one package. Key Features These devices offer low Vcc detection and reset assertion, five standard reset threshold voltages, and the ability to reprogram the low Vcc reset threshold voltage. They also […]
X9118 Dual Supply Low Power 1024-Tap 2-Wire Bus Data Sheet
Overview The X9118 is a single digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit. Features 1024 resistor taps, 10-bit resolution, 2-wire serial interface, four non-volatile data registers, power-on recall, and low power consumption. Applications Control, parameter adjustments, and signal processing in various systems, including audio, communication, and industrial systems. Key Specifications System Vcc: […]
10 Amps/Series 3300
Overview The Series 3300 connectors offer a range of features and options for panel and cable mounting, including pre-grounding connectors for enhanced safety. Key Features These connectors are U.L. recognized and CSA certified, with individual contacts rated at 10 amps and 750 volts rms. They are available in various styles, including panel and cable mounting […]
BATTERY PROTECTION IC WITH CELL-BALANCE FUNCTION S-8209A Series
Overview The S-8209A Series is a protection IC for lithium-ion and lithium polymer rechargeable batteries. It features high-accuracy voltage detection circuits, a delay circuit, and two types of cell-balance functions. Key Features High-accuracy voltage detection circuit with adjustable overcharge, overdischarge, and cell-balance detection voltages. Transmission function and two types of cell-balance functions for configuring protection […]
16 V INPUT, 75 mA VOLTAGE REGULATOR S-812C Series
The S-812C Series is a high-withstand voltage regulator IC developed using CMOS technology, suitable for applications requiring high withstand voltage and low current consumption. Key features include: Output Characteristics Output voltage: 2.0 V to 6.0 V (selectable in 0.1 V steps) Output voltage accuracy: ±12.0% Dropout voltage: 120 mV (typ., 5.0 V output product, Iout […]
DATA SHEET SMD POWER RESISTORS ZC MELF/MINI-MELF
Overview The datasheet describes the specifications and characteristics of YAGEO’s SMD-Metal Film Resistors in MELF style, specifically the ZC series (formerly ZGC Type 500 and 501). Key Features These resistors have a power rating of 0.25W to 1.0W, with resistance ranges from 2Ω to several MΩ, and tolerances of ±0.1% to ±1%. They have a […]
SuperMet Metallized Polypropylene Film Capacitors
Features SuperMet metallized polypropylene film capacitors offer a range of features, including: Up to 100°C operation Voltage range of 240VAC to 525VAC Single and dual capacitance ratings Self-clearing capability Low energy consumption Capacitance range of 3 to 75pF, depending on voltage and temperature rating Applications SuperMet capacitors are designed for use in: HID and fluorescent […]
POWER SPLITTERS
Resistive Power Dividers These power dividers enable frequency coverage from DC to high-rated frequencies. They do not provide high isolation, so an amplifier like Mini-Circuits’ ZFL series is recommended when high isolation is required. Matched power rating is 0.75W, with internal load dissipation of 0.375W. Available models include ZFRSC, PRSC, and ZAPDQ, with various frequency […]
ATC 700 A Series NPO Porcelain and Ceramic Multilayer Capacitors
The ATC 700 A Series offers high-performance NPO porcelain and ceramic multilayer capacitors with a capacitance range of 0.1 pF to 1000 pF. Key features include: Electrical Characteristics: Low ESR/ESL and zero TCC High self-resonance and low noise Quality factor (Q) greater than 10,000 (0.1 pF to 100 pF) and greater than 2000 (110 pF […]