Surface Mount Aluminum Electrolytic Capacitors NACEW Series
Overview The NACEW series of surface mount aluminum electrolytic capacitors features a cylindrical V-chip construction and is designed for reflow soldering. These capacitors meet the requirements of AEC-Q200 and are suitable for automotive equipment. Key Features Rated Voltage Range: 6.3 to 100Vdc Rated Capacitance Range: 1.0 to 12,000uF Operating Temperature Range: -55°C to +105°C Capacitance […]
Surface Mount Aluminum Electrolytic Capacitors NACEW Series
Overview The NACEW series of surface mount aluminum electrolytic capacitors features a cylindrical V-chip construction and is designed for reflow soldering. These capacitors meet the requirements of AEC-Q200 and are suitable for automotive equipment. Key Features Rated voltage range: 6.3 to 100Vdc Rated capacitance range: 1.0 to 12,000uF Operating temperature range: -55°C to +105°C Low […]
N25S830HA 256 kb Low Power Serial SRAMs 32 k x 8 Bit Organization
Overview The N25S830HA is a 256 kb serially accessed Static Random Access Memory (SRAM) internally organized as 32 k words by 8 bits. Key Features The device operates with a single chip select (CS) input and uses a simple Serial Peripheral Interface (SPI) serial bus. It has a HOLD pin that allows communication to the […]
SERIES J RELAY NONLATCH 2 PDT, 12 AMPS ENGINEERING DATA SHEET
Overview The SERIES J relay is a non-latch, 2-pole double-throw (2PDT) device with a 12-amp rating. It features an all-welded construction and a balanced-force coil. Key Characteristics Qualified at 10 amps, the relay operates at 28 VDC or 115/200 VAC, 400 Hz, and has a weight of 0.088 lb max. Dimensions are 1.01 in x […]
Silicon Rectifiers
Overview This datasheet provides specifications for a range of silicon rectifiers, including maximum ratings, electrical characteristics, and operating conditions. Key Features The rectifiers are available in various packages, including DO-15, R-3, and R-6, with current ratings from 2.5A to 6.0A. The devices operate over a temperature range of -65°C to +175°C and have a maximum […]
BNC Straight Jack Crimp G7 (RG-316/U)
Overview The BNC series is a commonly used coax connector with a bayonet coupling mechanism, suitable for up to 4 GHz applications. It is available in 50 and 75 Ohm impedances and features various connector styles for flexible, conformable, and semi-rigid cable types. Technical Attributes The connector has a durability of 2,500 mating cycles and […]
C8D3IPF29023-Cardedge Connector
Overview This datasheet describes a 31-position, wire-to-board card edge connector with a 2.54 mm centerline pitch and 5.08 mm row-to-row spacing. Key Features Electrical Characteristics: Operating voltage of 600 VDC, contact current rating of 3 A, and termination method is through-hole press-fit. Mechanical Characteristics: Vertical PCB mount orientation, parallel board-to-board configuration, and dimensions of 13.97 […]
ATC 600S Series Ultra-Low ESR, High Q NPO RF & Microwave Capacitors
Overview The ATC 600S Series offers ultra-low ESR, high Q NPO RF & Microwave Capacitors with the lowest ESR in its class and the highest working voltage of 250V. These capacitors are designed for high-frequency applications, including cellular base stations, wireless communications, broadband wireless services, satellite communications, and WiMAX (802.16). Key Features Standard EIA sizes: […]
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) COG Dielectric, 10 250 VDC (Commercial Grade)
Overview KEMET’s COG dielectric features a 125°C maximum operating temperature and is considered “stable.” It is suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. Benefits The COG dielectric exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with […]
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) COG Dielectric, 10 250 VDC (Commercial Grade)
Overview KEMET’s COG dielectric features a 125°C maximum operating temperature and is considered “stable.” It is suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. Benefits The COG dielectric exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with […]