Sta-Kon Termination Products Ring Terminals
Overview Sta-Kon offers a comprehensive line of ring terminals, including nylon-insulated and vinyl-insulated options, designed for various wire ranges and applications. Key Features These terminals feature brazed seam wire barrels, serrated barrels for increased grip on wire, and wire range identification on the tongue of each terminal. They are constructed of electrolytic copper for high […]
SMA Plugs – Straight Plugs Solder Type for Semi Rigid Cables and Right Angle Plugs Crimp Type for Flexible Cables
Product Overview This datasheet presents SMA plugs for semi rigid cables and right angle plugs for flexible cables. Key Features Available in various part numbers with different dimensions, cable groups, and materials (gold or passivated). Offered in straight and right angle configurations with solder or crimp type connections. Single piece body design with or without […]
Straight Flange Jacks Solder Type for Semi-Rigid Cables and Bulkhead Jacks Crimp Type for Flexible Cables
Product Overview This datasheet presents two types of jacks: Straight Flange Jacks Solder Type for Semi-Rigid Cables and Bulkhead Jacks Crimp Type for Flexible Cables. Straight Flange Jacks Solder Type These jacks are designed for semi-rigid cables and feature a captive center contact. They come in two flange types: 2-hole and square flange. Bulkhead Jacks […]
InGaAs PIN Photodiode R-11-XXX-G-B(B)-C
Overview The R-11-XXX-G-B(B)-C is a high-performance InGaAs PIN photodiode designed for data and telecommunication applications. Key Features High responsivity at 1310 nm and 1550 nm, low dark current, and fast pulse response. Operating temperature range: -40°C to 85°C. Hermetically sealed 3-pin metal case with integrated coated ball lens cap. Available in various active diameters: 40, […]
NKK Light Duty Miniature Toggles Series E
Overview The NKK Light Duty Miniature Toggles Series E offers a range of power and logic level capabilities, making them suitable for various applications. Key Features These toggles feature a high-torque bushing, stainless steel frame, and heat-resistant resin case that meets UL94V-0 flammability ratings. They also have an antijamming design, bias guard, and higher insulating […]
EISGA18-14.2848M
The EISGA18-14.2848M is a quartz crystal resonator with a nominal frequency of 14.2848MHz and a load capacitance of 18pF. It operates in parallel resonant mode and has an AT-cut fundamental mode of operation. The device has a frequency tolerance of ±15ppm at 25°C and ±3ppm over the temperature range of 0°C to 70°C. It also […]
EC2625TTS-25.00M TR Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
This datasheet describes a quartz crystal clock oscillator with a nominal frequency of 25.00MHz and a frequency tolerance of ±25ppm. The device operates on a 3.3Vdc supply voltage, has a maximum operating temperature range of -10°C to +70°C, and is available in a 5.0mm x 7.0mm ceramic surface mount package. Electrical Specifications: The oscillator has […]
TT Electronics SIL Resistor Network L Series Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
The SIL Resistor Network L Series is a range of thick film low profile SIP conformal coated resistor networks that are RoHS compliant. Electrical Characteristics The series offers a standard resistance range of 22R to 1M with tolerances of 1%, 2%, and 5%. The operating temperature range is -55°C to +125°C, and the maximum operating […]
L272, L272A Dual Power Operational Amplifier
Overview The L272 and L272A are high-power dual operational amplifiers designed for low-impedance loads, offering output current up to 0.7 A and operating at low voltage (Vs(MIN) = 4 V). Key Features Low saturation voltage (Ip = 0.5 A, Vo = 1.5 V) and thermal shutdown (TSD = 160°C). Ground-compatible inputs and large common mode […]
Surface Mount Ferrite Products Inductors & Ferrite Beads
Overview This datasheet presents a comprehensive range of surface mount ferrite products, including wire wound chip inductors and ferrite beads. Wire Wound Chip Inductors These inductors are available in various case sizes (0603, 0805, 1007, 1207, 0806) and types (standard, high current, low Rdc, bottom surface electrode). They feature low DC resistance, small size, and […]