T.omm Spacing SERIES 6200 ZIF 567vJ1v DIP Tigr SMT #z/t# Tigr ZIF Right Angle Through Hole Bottom Contact,SMT With Boss Bottom Contact Type
Overview The SERIES 6200 ZIF connector family offers various mounting options, including Through Hole, SMT with Boss, and Right Angle SMT. Key Features Applicable board thickness ranges from 0.8mm to 2.4mm. The connectors have a coplanarity of 0.1mm and are available in different variations, including Tape and Reel packaging. Ordering Information The ordering code format […]
SMD-FST 5×20 Surface Mount Fuse
Overview The SMD-FST 5×20 is a surface mount fuse designed for primary protection on SMD PCBs. It has a rated voltage of 250VAC and a breaking capacity of 35A – 125A. Key Features Time-Lag T characteristic, Au plating, and directly solderable on printed circuit boards. Approvals and Compliances Meets IEC 60127-2, UL 248-14, CSA2Z.2 No. […]
SC and FC Angled PC Cable Assemblies
Corning Cable Systems’ SC and FC Angled PC Cable Assemblies provide high-performance connectivity solutions for telecommunications applications, exceeding performance requirements for high bit-rate digital, optically amplified, WDM, and coherent communication systems. Features and Benefits These connectors combine high-precision zirconia ferrules, nickel-plated brass hardware, and engineered composites to provide a durable package with consistent, repeatable performance. […]
Subminiature D Type Connectors
Overview This datasheet describes subminiature D type connectors with a 90° angled design and solder installation. Key Features These connectors have an installation height of 7.3 mm (standard) and are available with various thread types, including M3, MJ, and 4-40 UNC screwlock. The connectors come in male and female variants, with different part numbers for […]
10 Amps/Series 3300
Overview The Series 3300 connectors offer a range of features and options for panel and cable mounting, with a focus on safety and ease of use. Key Features These connectors have a pre-grounding contact that engages before any other active contacts are mated, ensuring greater safety. They are available in various styles for chassis and […]
SASSSATION 3 0603 Thick Film Chip Resistor
Overview The SASSSATION 3 0603 Thick Film Chip Resistor is a standard grade, wraparound termination resistor with 96% alumina chip performance characteristics. Key Features Resistance range: 10-40MΩ with tolerances of 0.5%, 1%, 2%, 5%, and 10% TCR: +100, +200, +300 ppm Maximum power: 100 mW Maximum voltage: 45 Volts Environmental Performance Meets MIL-PRF-55342 standards for […]
Ultra Miniature 400 Hz Transformers
Overview This datasheet presents ultra-miniature 400 Hz transformers designed for aerospace applications, featuring printed circuit thru-hole construction and secondary split winding for half-voltage operation at twice the current. Key Features Manufactured to MIL-PRF-27, Grade 5, Class S Primary voltages: 115V or 26V VA ratings: 0.375 VA to 2.4 VA Regulation: 24% (17% for T units) […]
EC OG3C 0866 04 REVISED PER ECO-09-020774
Connector Header Assembly This datasheet describes a single-row, 100-position, 0.025 sq. post connector header assembly with a hold-down configuration. The assembly features gold-plated contact areas and matte tin-lead plating on the solder tail. The posts are formed to provide connector retention on the PC board until soldered. Key Features High-temperature configuration, breakaway notch, and selective […]
X4003, X4005 CPU Supervisor
Overview The X4003 and X4005 are CPU supervisors that combine power-on reset control, watchdog timer, and supply voltage supervision. These devices reduce system cost, board space requirements, and increase reliability. Key Features Selectable watchdog timer with three preset values (200ms, 600ms, 1.4s) and an option to disable it. Low Vcc detection and reset assertion with […]
X9428 Low Noise, Low Power, 2-Wire Bus Digitally Controlled Potentiometer (XDCP)
Overview The X9428 is a digitally controlled potentiometer (XDCP) that integrates a resistor array, registers, and counters, and a serial interface logic on a monolithic CMOS integrated microcircuit. Key Features The device features a 2-wire serial interface, low power CMOS, and a standby current of less than 1 μA, making it ideal for battery-operated applications. […]