A32-1 / SMA32-1 Cascadable Amplifier 100 to 2000 MHz
This datasheet describes a cascadable amplifier with a frequency range of 100 to 2000 MHz, featuring a low noise figure of 2.5 dB (typ.) and high output level of 15.5 dBm (typ.). The amplifier is designed using GaAs FET technology and is available in TO-8 and surface mount packages, with a connectorized version also available […]
A3932 Three-Phase Power MOSFET Controller
The A3932 is a three-phase MOSFET controller designed for use with bipolar brushless DC motors. It features high gate-current drive capability, synchronous rectification, and adjustable dead time for cross-conduction protection. The controller supports 100% duty cycle operation and has selectable fast or slow current-decay modes. Internal PWM peak current control and high-current gate drive are […]
GPO Thread-In Shroud, Press-In Shroud, and Hermetic Shrouds
Overview The datasheet presents three types of shrouds: Thread-In, Press-In, and Hermetic Shrouds, offered by Corning Gilbert Microwave Products. Thread-In Shroud Catalog numbers 4003-N33-01, 4003-N34-01, and 4003-N35-01 feature a 2.92mm sparkplug male thread-in shroud design. Press-In Shroud Catalog numbers A005-423-01, 4005-424-01, and 4005-425 offer a male press-in shroud with no c/c (center conductor). Hermetic Shrouds […]
Kingbright T-1 3/4 (5mm) Solid State Lamp – L-53GD-B Green
This datasheet describes a green light-emitting diode (LED) with a T-1 3/4 diameter package, featuring low power consumption and a long lifespan. The LED is made with Gallium Phosphide Green Light Emitting Diode technology and is RoHS compliant, available on tape and reel. Electrical and Optical Characteristics The device has a peak wavelength of 565nm, […]
L4972A 2A SWITCHING REGULATOR
Overview The L4972A is a 2A monolithic step-down switching regulator with a 5.1V to 40V output voltage range and 0 to 90% duty cycle range. Key Features Internal feed-forward line regulation, precise 5.1V * 2% on-chip reference, reset and power fail functions, input/output sync pin, under-voltage lockout with hysteresis turn-on, PWM latch for single pulse […]
270 Series Terminals
The 270 Series Terminals are designed for high-wattage applications, offering a range of wattage ratings from 12 to 1000 watts. These resistors feature all-welded construction, lead-free vitreous enamel coating, and are RoHS compliant. Key Features: Tubular ceramic core for mounting, with solder coated radial terminals suitable for soldering or bolt connection. Power rating based on […]
PART NUMBER DATA SHEET E1SFA18-25.00M
This datasheet describes a quartz crystal resonator with a nominal frequency of 25.00MHz and a frequency tolerance of ±3ppm at 25°C and ±50ppm over the operating temperature range of -40°C to +85°C. The device has a maximum load capacitance of 18pF, a shunt capacitance of 7pF, and a maximum equivalent series resistance of 40 ohms. […]
E1SC7DZF-125.00M Quartz Crystal Clock Oscillators XO (SPXO) LVPECL (PECL) 2.5Vdc 6 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
This datasheet describes a quartz crystal clock oscillator with a nominal frequency of 125.00MHz and a frequency tolerance/stability of ±50ppm over the operating temperature range. The device operates on a 2.5Vdc supply voltage with a maximum input current of 75mA and features LVPECL output logic with a rise/fall time of 30pSec typical and 70pSec maximum. […]
EC2645TTS-24.000M TR Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)
This datasheet describes a quartz crystal clock oscillator with a nominal frequency of 24.000MHz and a frequency tolerance/stability of ±20ppm. The device operates on a 3.3Vdc supply voltage, has a maximum operating temperature range of -10°C to +70°C, and is available in a 5.0mm x 7.0mm ceramic surface mount package. Electrical Specifications The oscillator has […]
SOLID TANTALUM ELECTROLYTIC CAPACITORS nichicon LoW ESR F91 Resin-molded Chip For SMD For High Frcq-ency
This datasheet describes the specifications and characteristics of Nichicon’s F91 series of solid tantalum electrolytic capacitors, which are designed for high-frequency applications and are compliant with the RoHS directive. Key Features The F91 series offers a range of capacitance values from 1.5μF to 680μF, with rated voltages of 6.3V, 10V, 16V, 20V, 25V, and 35V. […]